Report a Problem

Hi, I want to Adee Comprehensive Accessibility tool to edit my icon name. But form is disabled after selection of layer.

I faced this problem on and not off but couldn’t really find any patterns. Sometimes, figma make is hallucinating with my prompts and giving weird screens (replacing existing screens) and giving wild outputs. After some time or the next day, the problem is getting fixed. For sure, the problem is not with the prompt, the problem starts with the way it is reasoning it. If this can be fixed, it will be really good because the flow is getting cut quite often. 

Hello Figma Support Team,I would like to downgrade my current Education team to the Starter plan. If removal of the Education status is possible immediately, please proceed with that.For reference, I have seen the discussion here on your forum:https://forum.figma.com/ask-the-community-7/downgrade-from-education-41363?postid=164085#post164085Thank you for your prompt assistance.

Copying presentation link from SHARE gives me a different link than copying from the PLAY button. The link from the PLAY button leads to a 404 error.  

Hi,my Figma Make plan was renewed this month by mistake. I canceled my subscription right after noticing the renewal, and I submitted a support ticket (ID: #1481290) requesting a refund.It’s been a while and I havent received any response yet, so im posting here to ask if someone from the figma team could help with my request.im only asking for a refund of the most recent renewal charge, since the renewal was unintentional.Thank you!!

Mi proyecto de Figma Make ya no muestra en la vista previa, el resultado de las instrucciones que le doy; si bien me dice que ya aplicó los cambios, éstos no se ven reflejados en la vista previa, ¿que puedo hacer?, algunas cosas que ya tenía implementadas se han perdido y aunque le pido que regrese a la versión anterior y me dice que ya aplicó los cambios, ya no he podido recuperarlos.

Until last night I was working on my project with Figma Make and it was working perfectly — I was extremely happy with the results. Tomorrow I need to deliver a prototype for a client, and today when I opened the project again from my desktop app, the preview doesn’t show at all. Nothing.I refreshed it a thousand times, closed and reopened Figma, opened the project from another computer, then from the browser, and absolutely NOTHING works. I’m desperate. Nothing is visible. I press play and nothing happens. I try to open the link where I had published the first version and NOTHING. It’s broken.What’s going on? From what I see, there are several bugs reported about this. I urgently need help from the Figma support team! Yesterday I upgraded to the professional plan so I could enjoy these features, and today I start the day with a frustration of this magnitude because of such a horrible bug.This is even more serious. I´ve created a new project on Figma Maje and paste a new frame to start

My Organization is trying to move increase licenses from 10 to 30+ and move to Organization plan from Pro but I cannot get in touch with Sales Team. Can some one from sales contact [redacted by forum admin/moderator to remove PII] so we can complete the purchase? 

Lately, components have been behaving differently than when they were created. Here's an example. The text does not change color completely when hovering, it is the same text field.I have the feeling it's caused by the text in the link being edited. The components also no longer update correctly once the different text has been inserted. Is there a solution for this?  

Custom stroke setting of instances are reset whenever I change any part of its component. Its really hassle job to set custom stroke of instances on every touch in its component even though it is not about stroke.Custom stroke setting should follow its component value but, currently, it doesn’t follow and just reset after any value change in it’s component.It was not like that in the previous version but recently it keep generating issue about relation between  a component and instances.

The “Find and Replace” function does not work. When I search for a word, all items with that name are displayed, and when I click “Replace,” it says that no results were found that I could replace.

I’ve created a project and connected a custom domain. In the file settings, I’ve made sure to uncheck the “Exclude from search engine results” option.However, after publishing, the noindex meta tag still appears in the site’s head. There are no noindex tags in my code, and I’ve tried several workarounds; adding an index, follow meta tag and injecting a script to modify the DOM, but it seems Figma is inserting the tag automatically.Has anyone encountered this issue or found a reliable workaround?

I have found several bugs while using the conditional logic. when I duplicate a page, all interactions with conditional logic are deleted on the duplicated page. when I copy and paste interactions with conditional logic, they do not work when I navigate to other frames within the conditional logic. The reference to the frames is lost even though they are correctly highlighted on the canvas when selected in the interactions overlay (sorry, a bit difficult to explain). I have to recreate the reference for each statement to make it work. Can anyone confirm the problems with the conditional logic?

I can see the image I added to my designs in my Figma Sites but upon previewing my designs or publishing, the images don’t load 90% of the time. Some images load, some don’t in the same designs. (All images are personal photography). I’ve already restart Figma and cleared cache. HELP! I cant publish a site like this.

Dear Figma Community!We kindly ask you to delete one of our accounts that was created by mistake. For future use, we will only be working with the main account registered under the owner.We also request that the issued invoice related to the duplicate account be withdrawn.Thank you in advance for your understanding and prompt assistance.Best regards,Victoria 

This is the worst bug I’ve never encountered, not sure how did this happen and even pass the quality check:Horizontal autolayout functions as vertical autolayout. I need to click bottom left aligned to let the component act as top left alignedYou can check the attached image.

We are experiencing a critical issue affecting our team and our clients:Out of nowhere, when trying to edit a text layer, Figma suddenly shows a “Missing Font” warning. The file had been working perfectly for months — no changes were made to fonts, library, or system settings before the error appeared.When we relink the missing font to the correct local font, all connected text styles lose their hierarchy. Text reverts to default settings, and we have to manually reapply all styles across the entire file.Critical for us as a service provider because our clients rely on Figma’s stability for ongoing projects and working with libraries. Context: System: macOS, Figma Desktop App, latest version Fonts are correctly installed locally on all machines Figma Font Helper is running on all devices No changes to font versions or system configuration before the issue started Trigger: Simply selecting and editing text in a long-working file  Right now, we can only tell our client to not upd

FigmaSitesでテキストを左寄せにしているのにセンター寄せになってしまいます。以前は問題なく表示されていましたが、最近不具合が起きています。 全てのテキストで同様の不具合が起こっているわけではなく、以下の場合に発生しています。コンポーネント化されている テキストを塗り・左寄せに設定 改善を願いますが、対処法はありますか？

1. Describe the bug/Issue you're running into? When typing Chinese characters in FigJam, certain characters are rendered with an incorrect, condensed width. For example, the character "关" (guān) appears squished and is visually inconsistent with other characters in the same text box. This seems to be a font rendering bug that affects multiple characters.2. Are you able to consistently reproduce it? If so what are the steps? Yes. The issue is consistently reproducible. Steps to reproduce: Open any new or existing FigJam file in a web browser. Select the Text tool. Type the Chinese phrase "关于正常字体的宽度". Observe the character "关" in the text box. It will have an incorrect, condensed width. The issue persists regardless of the selected font preset (Simple, Bookish, etc.). 3. Share a screenshot, recording, console log, link to the file, etc. 4. Is the issue only happening in desktop app or a specific browser, or both? Both.5. What OS/version and/or browser/version are you using? OS: m

Good day!Why was the option Show behind transparent area removed in the Drop Shadow effect?This made the work very difficult ( [The title of this post was updated by a moderator from “It was good function” to “Missing ‘Show behind transparent areas’ option in Drop shadow effect” on 20-Jul-2025.]

When importing SVGs stop converting <circle> tags into <path> tags.Please stop. It breaks my workflows.Please please overhaul your SVG engine. It is so buggy and broken.

I have a button component with dozens of styles/sizes/variables. For icons in the button, I used to use icons from one library, but I recently tried to switch to diff icon set.  The standard icon size is 1 (16px), but for other button sizes, I want icon sizes 0.75, 2, 3, etc. However, when I try to update the icon instance in one of the button variants to Size 2, Figma changes ALL instances of the icon to Size 2 across all my button variants. I’m super frustrated. Anyone have ideas to address this?

I am a student at INSAT (Institut National des Sciences Appliquées et de Technologie, Tunisia) and I am currently using my official university email address (@insat.ucar.tn) to access Figma. However, the system does not recognize my domain as eligible for the Education Plan.Could you please review my case and add @insat.ucar.tn to the approved education domains so that I can benefit from the Figma Education Plan? I can provide proof of enrollment if required.Thank you for your support

Hi,I contacted support 3 days ago about an unauthorized billing charge but haven’t received a follow-up response.Could someone please help resolve this billing issue? #1475329Thanks,Ray

I upgraded to the professional plan, yet, I can’t publish my library within the pro team? Can someone please help me with this?  Whenever I tried to publish my library, it shows a popup of the upgrading plan hmmm