Get Solutions

I’m seeing a mismatch between SVGs returned through Figma MCP and SVGs exported directly from the Figma UI.What I expectedWhen I request a vector/component asset through MCP, I expected the SVG export to preserve the same export box/canvas as the original Figma component/frame export.What happens insteadThe SVG asset returned through MCP appears to be tightly cropped to the inner vector path bounds, while the direct SVG export from Figma keeps the full component canvas.Concrete exampleI have an alphabet component where each letter is designed inside a 42x42 frame/component.the MCP asset is cropped to the actual stroke bounds the direct Figma export preserves the full 42x42 canvas and empty space/paddingWhy this mattersThis breaks 1:1 implementation workflows when layout depends on the original component export box. In my case, letters are placed inside fixed-size crossword cells, and the MCP-exported SVGs no longer align visually the same way as the Figma design.QuestionIs this expecte

Why my 2 account got suspend ? At least give me reason ??? If it was a mistake then re open my account. I have a job to do ???Unban these 2 acount:[redacted by forum admin/moderator to remove PII]

Situation:I was using an education account in Figma. I used all my credits in Figma Make, so I created a professional account. Now I’m trying to copy and paste the same frame into Figma Make, but I keep getting an error saying:“The image is too large. Please reduce the number of images or use smaller image sizes.” Question:What should I do to fix this?

Hey ya’ll, working on this project and ran into this issue where I have 3 separate components that each have two variants with smart animate in order to make them spin, which I then copied into another component set to smart animate those 3 animated components to pop up behind an element as they spin. When I preview this, it just jumps to the last variable with no animation.The things I’ve checked/tried are:Memory usage is only 2% As far as I can see, all my layers are in the same order and the names are the same in each component I’ve originally set the parent frame to auto layout and fixed hight and width, which caused me to put everything else in more nested frames to keep the elements overlapping like I wanted, but once reading that sometimes too many nested components can mess with smart animate, I have taken off auto layout for the parent but kept the fixed hight and width I’ve tried setting the after delay for longer but it changes nothing I’ve also tried not combining component

Hi, I just got stuck with my app development and can’t exactly figure it out how to proceed without proceeding with worst and most tedious alternative option. I suppose the “Deploy” in my case does not relate to the Supabase Deploy button since that is obvious, I’ve been using it since I started developing my app, I had significant progress with my latest version 375 but didn’t encounter an issue similar to this one. I can’t find any “Sync Backend” button neither and no any experience with Supabase CLI. I might be missing something and would much appreciate if someone could assist me in solving this issue with a step-by-step guideline be it via Figma Make (if doable) or via Supabase or terminal as a last option. Here are the details the last response from Figma Make: “The root cause is confirmed: the /lorem/ipsums endpoint hasn't been deployed to your Supabase backend yet.Here's what's happening:Your frontend calls /lorem/ipsums (line 311 in CompanyDashboardUpdated.tsx) The deployed ba

Hi all,I’m running into an issue with Smart Animate that seems to be a recent regression. I’ve used Smart Animate successfully across multiple components in my file, and everything was working fine in Present mode until this past week.Now, some animations that used to work perfectly are either:• Not playing at all, or• Playing incorrectly (e.g. jumpy, incomplete, or skipping interpolation)Here’s what I’ve found through troubleshooting:• The animations still work when I isolate the animated component and test it on its own.• They break only when nested inside more complex parent components (which contain other nested instances).• Detaching the parent instance or simplifying the nesting restores the expected animation behaviour.• Clearing Figma’s cache and restarting the app had no effect.• I haven’t changed anything in the component structure that would explain this — it genuinely seems to have broken out of the blue.This leads me to suspect either:• A recent Figma update changed how Sm

most of the credits spent are to fix wrong AI outputs. It’s super unfair to pay for what you haven’t asked for.  Will say goodbye to figma make and search for more accurate AI. 

退款申请 – 非预期续订2个月未使用 持续扣款

It was submitted around March 14th. It's been nearly a month. Could you please help confirm if there is any issue or if we should just wait? Thank you! TypeCraft插件審核狀態壹直在In review大約在3月14日提交的，將近壹個月時間了，請幫助確認是有什麽問題麽，還是繼續等待，謝謝！

I'm one of the admins in my company and i’m leaving soon, how do I transfer all projects i’m the owner of automatically to another admin? I have hundreds of projects I own and can’t go back so many years to individually transfer ownership one by one. Is their a way to simply say “all the projects under my ownership are now moved to X”?

I have dozens of ‘modified’ existing components in a design library that are in various states of progress. When I went to publish just two of them, I didn’t realize they were all selected - I published the entire library. I worry that if people accept the updates to these unfinished components they may break.Can I undo this?

For the past couple of days, some of my Figma files haven't been opening properly.I've already tried clearing the cache, reinstalling the desktop app, and switching browsers.It occasionally opens in the browser or on a guest profile, but even then other pages within the file fail to load.The files are slightly larger than my usual projects, but they were working fine just a few days ago. 

Hi, I need to leave the team "IHC" (team ID: 1360788437784275201) but the "Leave team" option doesn't appear anywhere because I only have limited access on this team. There is no active admin who can remove me — nobody on the team has access to their accounts anymore. My account email is [redacted by moderator to remove personal information]. Could a Figma support specialist please remove me from this team? Thank you.

모든 모델들이 위와같이 에러가 나오는데, 해결 할 방법이 있나요?

Hi! I’m testing a site built with the new Figma Sites feature. I’ve set the top navigation bar as a sticky element and made sure it’s positioned at the very top of the layer tree. In the Layout panel, canvas stacking is set to “First on top.”Canvas stakcking settingsIt looks fine on Figma and Chrome(desktop & laptop)On Safari and mobile browsers, the sticky navigation bar appears underneath the hero section content, even though it’s set to be the topmost layer in the design.  On Chrome (desktop & laptop): everything works as intended — the GNB stays sticky and always remains on top. On Safari (desktop & laptop) and all mobile browsers (Safari & Chrome): the GNB is sticky, but appears underneath other layers and is partially or fully hidden.  Is there a workaround or fix for this issue? Thanks in advance!

I am trying to get information on a plugin I have submitted for review. It has been 17 days and wanted to know if there was a way to check on the status. If there is, what information would be needed in order to check on the status?  https://www.figma.com/community/plugin/1618700459957559621

I paid about $5 on March 11th and canceled the plan immediately because I wasn't using it much, but an additional $15.40 was withdrawn on April 11th. I didn't receive any notification, and since this is an unwanted charge, you shouldn't make illegal payments without asking for my consent.Please issue a refund.

Okay, I’ve spent WEEKS problem shooting this with ChatGPT and today I finally found out what was wrong. It was a bug. Nothing I did wrong. So, I wanted to create a link navigation where the hover effect was an underline for the link text. First surpirse was that I couldn’t just do that inside my initial “Navigation button” component, because Figma overhauls text styles to be consistent within a component’s variants. Okay, easy workaround: create a Label component with an instance without underline and one with and use those inside the final button component using the underlined variant only in the “Hover” variant. I learned that interactions should only be done in the main component, not in the “Label” component. Okay, seemed to be working on the test layer, but moving it to the actual design page broke the interaction and nothing happened. Cue weeks of troubleshooting, creating and re-creating components, testing with background colour changes to see if at least the button hover insta

My Figma Make is always giving me this error. Couldn’t reach server, try again in a minute. Its happening from last few months. I have changed internet, cleared cache and also try this on my other computer.

I used Figma Make to redesign my dashboard using the model Claude Opus 4.6 and after the generation the design is not shown . it stucks at loading 

Good Day I asked AI to create 4 instagram posts, by version 5 i was ready to download the content. at this point i had 2000 credits. Figma could not get the content to download, and when we reached version 21 i was told i was out of credits. for 16 versions i asked for the exact same thing and Figma make was unable to solve a simple problem as how to download a file? I would like to have my credits refunded as this was not my fault, i would also like you to have a look at the history of my interaction and advise we are unable to download a file?

I’m using Figma through Firefox on Linux. Dragging the canvas via middle mouse button or just pressing it, inserts a 0 to the middle of the screen. Sometimes it was a different text, I don’t know what it’s based on. This would be nice to fix, now I always have to undo once after every navigation.

Figma Make just reverts to some version automatically even after making changes. This is happening repeatedly. Revert also isn’t consistent with one version, random parts get reverted, some parts don’t. Very frustrating as it is wasting my credits. Attached what Make says about the issue. 

Hi,I'm having trouble getting the Figma Desktop MCP integration to connect with Claude.ai.Setup:- Latest version of Figma Desktop (macOS)- Desktop MCP server enabled in settings- Image source set to Local server- Iceberg Master file open with a node selectedIssue:The MCP panel in Dev Mode shows 'Session activity: Not sent' — the session never establishes. When I send a prompt to Claude.ai referencing a Figma node URL, Claude's tools return 'No result received from client-side tool execution' every time.What I've tried:- Restarting Figma Desktop- Re-enabling the MCP server- Selecting different nodes before sending prompts- Starting new Claude.ai conversations- Signing out and back in to Figma DesktopNone of these resolved the issue. The session activity remains 'Not sent' throughout.Could you help me understand why the session isn't being established and how to fix it?Thank you

when i goto see prototype it shows on only 1/4th of screen and buttons are also not in placeit is a big hassle and no matter what i do, i need it to display properly. you can see both frames show properly in edit section but when i showcase it shows only 1/4th of size. i have tried all settings in showcase but nothing works.it is not fixing, anyone help me out