Recently active topics

Hi! I 've declined my subscription, but you still trying to take money from me. I dont't need any subscription and I don’t have any right now

Hello!I have a very unpleasant situation. I accidentally deleted a team that contained all my work files. The email address associated with my account was unable to receive an email with a link to restore the team because the email's storage space was full. I have since cleared the email's storage, but the email has not been received. I urgently need to regain access to this team, and I am pleading with you for assistance. The email address that did not receive the email is [redacted by forum moderator to remove PII]

Hi everyone,I've been experiencing issues accessing Figma from Uzbekistan recently. It seems that some regional restrictions might be affecting the service. Could anyone provide insights into what's happening and if there have been any recent changes or updates in the past week? Any help or clarification would be greatly appreciated.Thank you!

Hi,The addition of annotations and measurements to Design mode is such a great decision.However this is rendered almost useless if the annotations and measurements can’t be made visible to View Seat users.Often annotations are used for communication with a range of stakeholders, not just designers and developers. It’s not viable to upgrade every stakeholder to a Full or Dev seat to engage with this content.

Hello!I tried re verification for FIGMA student, but it was showing network error even though network was good, and continuously trying it was still showing the same error.Then it started showing Verification limit exceeded.So I contacted sheerID via mail, they responded with:We were unable to process your verification request. And Your ticket has now been permanently closed.I mail them again and again still got no solution.. If it's possible resetting the verification limit, please do it.Please provide the solution for this issue otherwise I won't be able to re verify student plan.I have also attached the image for better clarification. 

Good afternoon, everyone! Like many users from Uzbekistan, I have noticed that it is not possible to work normally in Figma; projects cannot be opened either from the browser or from the application. Connection error: -106

I’m from GetRank Digital, a full-service digital growth agency. We specialize in SEO, social media marketing, and brand optimization, helping businesses in the UK, USA, and Canada boost visibility and engagement.Here on Figma, I’m sharing web design, UI/UX concepts, marketing assets, and campaign visuals that have helped our clients grow online. Explore our work and get inspired!

After adding Figma MCP in Cursor, a 429 error is returned when reading the design draft

Hello team, Yesterday i applied for figma for education and got verified using sheer ID. I then signed up to figma. But, account is still showing as free. when i click on free button, its giving me option to upgrade but not showing education option. but already my student account was verified and approved via sheer id, but not reflecting in the figma account. i tried logging out and logging in, creating new team and everything possible. but nothing helped. Can you help me with this pelase? Regards,

I designed this icon. But I think it's fine as it is. If anyone has any suggestions, please specify which part you want.  

Maybe on confused on how the feature works. If the team is using for ideation and keeping the master branch clean for devs and clients. When it comes time to push elements from a branch to the master file, currently it pushes the entire branch. This is pointless. We don’t want all the ideation, all the options, all the throw away work, just the version that we moved forward with. Currently we need to make a new branch we call “to be merged” and we need to copy just the artboards that are approved into the new branch then merge from there. This feels like to many steps and is complicated on a team of 4 designers. Shouldn’t there be an option to select just the artboards, components, styles, etc that we want to bring forward and leave all the other work in the archived branch incase we need to go back and grab something from it in the future? Pushing everything makes the feature feel useless because you’re either deleting all your ideation or creating “merge” branches to make sure you do

Hello, when I try to make a payment, I get an error saying “the card was declined due to frequent repeated attempts.” I waited 24 hours (or more) to try again, but the error did not go away. I then used a new card, and now the same error is showing for the new card as well. What should I do? The card is Visa.

I only purchased ONE (1) license and nothing more! I was charged for two, and I did not request any additional licenses, nothing more, I ONLY PURCHASED A SINGLE LICENSE FOR US$5, How can you simply charge me 5X more than what I purchased?

Hi ! If you can help it’s wonderful ?I’ve been trying to connect a repository with Figma Make but each time on the figma website i have the same message popping “Could not create repository” in red on the bottom. I tried doing it on chrome and Safari, both failed. Do you have any ideas ?   

Hello everyone !I’m posting here because my Figma Education status issue is still unresolved despite many attempts, and this situation has been ongoing since October. To summarize clearly:My student status was successfully verified and approved by SheerID on October 2025, using my education email address. In the meantime, I made the mistake of changing the email address on my Figma account to my personal email, which caused my Education status to break / disappear on my account. After switching my Figma account email back to my student email, my Education status is no longer recognized: the app constantly asks me to reverify my student status. However, I cannot reverify, because the system displays the message “Verification Limit Exceeded” at the end of the form, since my initial request was already approved.I am therefore stuck in a loop:Figma asks me to reverify or contact SheerID, SheerID confirms that I am already verified and redirects me back to Figma. No new student verification

Hello, I have seen this issue quite a few times in the forum (locked out of Figma account that is tied to school email that can no longer be accessed) and was unable to get a response after I opened a support ticket, so here I am seeking help for this issue.The workaround that is suggested by Support staff on this forum (email forwarding) is not an option for me unfortunately.Thank you!

Hello, I recently downgraded to a free plan and would like to access my last few invoices (specifically for the partial refund that came after downgrading partway through my plan). Invoices are no longer visible in Figma, and I believe I need someone to open a support ticket for this? Thank you!

I had figma free education plan which i applied for now they emailed me to re-verify by september 29 or I'll lose those pro features now I joined figma recently a month back i have re-applied for verification but they say i have exceeded limit for verification or availed this offer. I have no clue how to solve this i have contacted Sheer Id support team too.

We have these icon colors set up for different button types.  But when I switch the size of the button(XS, S, M, L), these icon colors are retaining for the two of the sizes but for the other two sizes the colors are not retaining for the icons.   

Getting the “Publishing failed: Please reload the page to publish” error when I try to publish.I’ve gone through the older treads but haven’t found a solutions beside Figma sent out a fix. I’ve tried everything I can think of including the obvious solutions like reloading tab and restarting computer.I’ve tried deleting all new components and even restored earlier versions, from the version history panel, that were previously published. Yet still no luck. My other libraries will publish, but my main library will not. 🙄

Figma has to be one of the worst pieces of software every created by humans. Seems promising and then the amount of frustration and time you waste using it becomes unimaginable.Mobile app sucks so much and is so slow and sluggish on iOS that I cannot use it for more then 2 minutes before wanting to just delete it off my phone.How can the Figma team be so terrible at their jobs?

– File name: “Блог 🤩”– File type: FigJam– Workspace: Alina’s team– Last opened: December 12– On December 15, when I tried to open the tab that was always open, I got an error and the file became inaccessible. Could you please check whether this file can be restored from backups?Thank you for your help!

This has been mentioned here: Hide layer using variables - #5 by Andreas_Braendhaugen1 Invert boolean variable for layer display - #14 by Desislava_Slavkova Inverted Boolean Property - #2 by drewcovi_usb but those topics are all closed. I am looking for the availability to HIDE a layer when a Boolean variable is TRUE and SHOW it when it is FALSE. So, the inverse of the default/current behavior. I want to do this without using components. Use case: When a variable is true, show one frame. When that same variable is false, show a different frame. I can get basically this by using two different variables: but it would be more convenient to be able to do it with just one. Just give me a Boolean toggle when the variable is used to say if the variable should be inverted or not.

Hi all, Is there anyone able to connect Figma MCP Server with Google Antigravity (I know it is not supported tool yet)? I tried using client ID and secret, but I am receiving the following error:Invalid scope: mcp:connect Thanks a lot for comments!

I am currently a student and cannot verify myself to get access to the student plan. I have already spoken to the course provider and they say its because my account was created a while ago, which does not make any sense to me. I have also changed my Role to Education through settings. Can someone help?