Get Solutions

 why am I having this prototype problem? and how to fix it?

当我调整了原始组件后在新文件中更新实例点击全部更新无法全部替换，需要手动一个个实例去更新

Hi everyone.Our team and I have been using figma for a while. One of our front-end developers recently told me that the line height in Figma, which used to be displayed in pixels (px), suddenly started showing in percentage (%) about a month ago.In my case, I’ve always set percentage for text styles, so me and others haven’t experienced any issues. However, for him, it was always in px before, and now it seems to have changed automatically without any manual adjustments. Has anyone else experienced this issue? I would appreciate any solutions or suggestions. Thank you in advance!

Greetings,I have been having issues with a low-fi prototype I am designing in Figma. I am new to Figma, so I tried looking up answers on Youtube, using AI chats like Perplexity and ChatGPT, and looking through the conversations here. I find that none of these has revealed the answer.I have a back button on all of my screens, but it does not go back. I have the trigger set to “On Tap” and the action is “Back”. When I try to do it the longer way, I go to “Navigate To” under actions, but “Previous Page” is not listed as an option for a page to navigate to, though all my pages are there. I chose to “Navigate To” and then a specific page, but the button still does not work. I can only move forward through the flow, and never back. How do I fix this? 

Hi! My team is working on a project brief template that would include links to design figma/figjam files, and I’m experiencing some issues with links to pages/frames in current design don’t translate properly when used as an instance in our catalog figma file.We use the template in the individual design file, which would include the link to this specific design file because we want to share this in different places, then create a component out of it so we only need to update in one place.While in the individual design file, the links usually say something like “Go To blablabla” instead of “Open blabla” if we were linking to a different file.However, we ran into issues when we publish the component and insert the instance to our master catalog file, then all the links to pages/frames in this specific design files all became either not working or says “Frame in this file”, or it would point to the corresponding page in the catalog file. For example, if I link page 1 of the design file, t

Hello!I’m building a video player prototype using Figma’s video import feature. I’ve created a play/pause button that starts and stops the video as expected. I also added a time display that updates as the video plays — it's a component set with variants like 00:01, 00:02, etc., using "After Delay → Change To" to simulate the progression.Where I’m stuck is getting the time display to start and stop in sync with the play/pause button. Right now, the timer keeps running even when the video is paused.Any ideas or tips on how to link the timer to the play/pause action would be greatly appreciated!Thanks so much!

Hi, guys! Could you share your experience with responsive design? How do you show designs for different screens? Do you create responsive from the start, or do you make it separately? I have large and complicated project with lots of screens for desktop size. What would be the best way to show design in mobile screens? I did not create responsive from the start because it was not requested, but now some screens should be shown for mobile screens. Please share your opinions...

Como posso resolver o problema de atalhos? Pois os mesmos não estão funcionando, e os poucos que funcionam, não estão no padrão original.

There is a major mask cropping / scrolling problem - it affects every frame with an object that goes outside the bounds on the frame. It breaks every prototype. It cannot be fixed with a mask or with anything. Please see this video: The red area should not be visible as it is outside of the art board bounds and yet when wanting to scroll a prototype page vertically it breaks because it does not crop the content correctly. There should be no way to see the red element when in prototype mode - this is a bug and needs fixing.If someone thinks this is intended behaviour, they are wrong because most designers will want to have objects that run off the canvas or that are clipped. The main issue is that you would expect to use a mask to achieve this crop without additional scroll but Figma calculates the object measurements from the image within the mask not by the mask bounds, so therefore we all have a major problem with clipping, prototype and masking.

Hi there, I’m trying to update from main to one of my branches. There are 3 conflicts. After I resolved them and went to the next page where it shows all the other non-conflicting changes, the Apply changes button is disabled for me. I can’t click on any of the changes/layers in the right preview pane either. Am I doing anything wrong here? Would appreciate any help or pointers! Thanks! Ethan

Hello, I am trying to figure out how I need to configure SCIM Provisioning in Microsoft Entra in case the user principal name (upn) is not the same as the “mail” attribute. Our company has multiple top-level domains. In this case the global domain, used as user principal name is always example**.com**. The user attribute “mail” is based on the top level domain of the user location, like example**.de** or example**.com**. After configuring SCIM provisioning for my users, they are shown in the UI, but after logging in with their mail or upn, the SCIM provisioning state of the user is stuck at “pending scim”. The shown mail address is the upn domain example**.com**. I followed these instructions to setup SCIM provisioning:Figma Learn - Help Center

I find the floating bottom toolbar more visually complex and challenging to use compared to the previous top toolbar. Constantly shifting my attention downwards disrupts my workflow and feels inconvenient. It would be helpful if we could either revert to the previous layout or have the option to move the toolbar to the top, bottom, or reposition it freely—similar to Photoshop. This flexibility would allow users to customize the layout to better suit their workflow.

You (Figma) gave us the option to revert to UI2 if we didn’t like the floating toolbar, and now you’re telling us that you’re forcing us to use UI3. This is incredibly frustrating. The floating toolbar at the bottom of the screen is distracting and counterintuitive. This strikes me as a decision that was made with little to no user testing. The vast majority of all design apps have the tools at the top, or at the VERY LEAST give the user the option to move the toolbars around. Be better, Figma.

Hello there, I want to join 2 vector paths in Figma, but I don't know how to do it : Why I can't use Vector > Join Selection with my vector paths ? See attachment file above this line of text.Thanks for your help!

Hey there, I have been trying to update from branch to main already for 5 times and get the same issue. After reviewing all changes and click on Next, I am not able to click on “Apply changes” button as the button is disabled (see attached) I am editor and owner of my file. Can someone help me out? I will highly appreciate your help. Best, Hendry

我不确定这个 SVG 使用什么协议版本，但主流浏览器可以正确解析它（Chrome、Edge、Safari）  

I've been learning Figma for the past six months. I came across this website (https://organimo.com/) and really liked the scrolling effect. I’d love to recreate something similar as a prototype in Figma. Could anyone guide me on how to achieve this? Any help would be greatly appreciated!

Hello Guys i have a problem with only first frame/s that can be exported. After that first export i cant export anymore frames unless i reload. It can be a pain when the file is large and for every export needs to be reloaded. I use browser figma not App and i would like to stay there.

Is it possible to see all the places where a defined theme variable is used? Like “go to references” in code.

Hi, I’ve created a site in Relume and imported into Figma. I’ve then installed the ‘Figma to Elementor’ plugin, but when I go convert, i get an figma “the node is not a mainframe” error, which prevents the plugin from importing to Elementor. I’ve tried grouping and framing the selection but with no joy.Does anyone have any experience with this plugin or the node not a mainframe issue?ThanksDean.

Hello, everybody! When I open any project I get a black screen on canvas. The UI are normal, but the project doesn't appear on the screen. I'm having this issue only in the Figma app for mac. Anyone experiencing the same issue?

Hello everyone!I've been using Figma for a short time, but I'm having trouble installing plugins. Every time I try, I get this error: 'An error occurred while loading the plugin environment.'I've already tried the following troubleshooting steps:Testing both on the app and in the browser (same issue in both) Clearing the cache Uninstalling and reinstalling the app Checking for updatesNone of these steps have solved the issue, and it happens with all the plugins I try to install (Lorem Ipsum, Unsplash, Google Icons, etc.).Any idea what could be causing this and how I can fix it?Thanks!

Hello,I have a frame with a 12 column stretched grid layout. In this frame I have an autolayout (left/right). The left container is also an autolayout with text in it.the text width is relative to the grid. When I resize the whole frame the grid resizes and i want the text width to also resize as the grid.See this video for reference: https://fspee.com/elementor.mp4I have the same problem when the left/right are not 50/50 but have 5/12 col + 7/12 for example.I guess it’s the same issue.See this video for reference: https://fspee.com/elementor-2.mp4Is this even possible?Thank you.

I don’t know what’s happened to my controls all of a sudden, but whenever I type a number into the width box in the right panel, the height of the frame changes, and vice versa. When I type a number into the vertical padding box, the horizontal padding of the frame changes and vice versa. It’s an issue both in the browser version and desktop app. I think I might have accidentally pressed some weird keyboard shortcut but I’m not sure and I don’t know how to fix it

I have designed two screens using Auto Layout, but when running the prototype and switching between different prototype flow options, one of the options does not display correctly in the Responsive Scaling mode. The initial option loads as expected, but after switching, the second option fails to render properly. To display it correctly, I have to manually reload the tab.