Get Solutions

Zscaler is blocking Figma desktop application in the office network. But the same is accessible through browser in the same network. I tried adjusting the registry settings suggested in the Figma help center. But unfortunately it didn't work. Even the IT team is not able to figure out the issue. Please help to resolve this. Any suggested settings or adjustments need to be done? 

I have probably read all the answers regarding slow file issues however this is not something I have seen before and none of those answers I read solved my issue.I was trying to create another color mode in the variables, I hit duplicate on the last one and it took Figma forever to create a duplicate of the mode. While I was waiting I hit the button again, and after about 10-15 minutes 2 modes were created, the last one however looked like it was uneditable.I tried to delete one and every time I did that Figma froze. I tried everything from restarting my computer to shutting and restarting, clearing browser and app cache, logging out of my account both on browser and desktop, force quitting and clearing the cache on terminal, deleting figma and reinstalling. Is I forgot anything else I probably tried that too.Nothing, Figma froze every time  tried to delete. Finally, I asked my colleague to go in and do it for me. Done in a second. And I don’t think this is a slow computer issue becaus

Hi,I thought drafts were private until you put them in a team or share with someone.I realized that every time i create a draft, who can access section is “Anyone in my team” by default.What does that mean? Do i have to change my drafts to “only me”  every time i create a draft? So confusing. Thank you  

Hi,I have the dev mode access and I am trying to select the frame from the layer section but I am not able to have the selection persistent.As soon as I select the frame the selection of the mock and frame from the layers section sync and within the blink of an eye before even making any other interaction my selection goes away and I don’t get to use properties, links and assets options.I am using the followingVisual Studio code version: 1.101.2OS: Windows_NT x64Figma version: 0.4.1

I made uikit, published the library, and started using it in another file. Unfortunately, the component has magically changed, which greatly complicates the work 

My company mate moved from our company to our subsidiary company. Can be possible to change his email id?. If yes, please guide me the procedure to update. 

Hello, We are using Components. We have create Page 1 and added all our master components in one section.Now, we want to create a duplicate of that page. The problem is that our Components are still linked on the components on Page 1 instead of Page 2. Is there a way to automatically relink them based on the Components that exist on the same page?

Hi everyone,We’ve run into a strange issue with one of our Figma files: when we open the document, several layers randomly appear invisible. The only way to bring them back is to go through each layer, toggle its visibility, or click on it—yet some still refuse to re-render.Does anyone know what might be causing this? We wondered if it’s a rendering glitch, but the file isn’t particularly heavy. Any suggestions for a less tedious fix would be greatly appreciated.Thanks in advance!   

Huion table Ispiroy H640P. Marker starts lines with dot in the begining of line. I can’t draw plus sign on board, as a result I’m getting this: 

I'm developing an image-related plugin for Figma. Since this plugin allows users to upload many images at once, the speed of loading images is crucial. When there are many images on the canvas, the images are loading slowly. My plugin can generate images in bulk - it can instantly create over 100 images and potentially generate more than 1000 images. I anticipate this could be inconvenient when other people join or when someone closes and reopens the document, as these images would load slowly.In my testing, I tried reducing the image size itself and decreasing the image file size before placing them on the canvas, but this didn't significantly reduce the time it takes to load the images.Is there any API, setting, or option available in Figma plugins that can help speed up the loading of images that are already placed on the Figma canvas?

I’m looking to create this scenario:a sticky header (title bar in this example) that’s responsive if the screen width increases (e.g. dragging the outer frame) that also stays in front of the content below it when scrolledHowever, I can only seem to be able to be able to achieve the first two - see screenshots below. Is this scenario possible and if so how? Cheers!Default view in prototype modeScrolled view in prototype mode (content is in front of status bar)Screen is responsive in design mode 

Can anyone send me video/screenshots of process sharing libraries as a host in connected project? Figma documentation does not mention how to do it prcisesly 

Hello everyone!I'm facing an issue with interactive components and icons in Figma.I’ve created a button component that includes an icon (e.g., a camera icon) and some text, all wrapped in an Auto Layout. The default state of the icon is a line version, and on hover, I want it to switch to a filled version of the same icon. This works fine when using the default camera icon — I’ve set up the component so that the hover state changes both the icon and the button's background color.The problem arises when I use an instance of this button and swap the icon (for example, from camera-line to pencil-line). When I preview the design in Presentation mode, the hover interaction still changes the icon back to the camera-filled icon, instead of showing the filled version of the new icon (e.g., pencil-filled).I believe this is happening because the hover state is tied specifically to the camera icon, not a generic slot that supports swapping both line and fill icons as variants.Here's how I've stru

 I have a personal Figma account (used only once on this device) and company account that I am  mainly using. However, every time I open Figma, it defaults back to my personal account — even after I remove it, it reappears.My work account, on the other hand, requires me to log in again every time I switch users — which can be up to 7–8 times a day.Setup: Mac Desktop App Chrome browser Has anyone experienced this or found a good way to make sure Figma reliably stays logged in to the correct account? Any suggestions would be really helpful!

I waited a long time for my figma to be updated, but even after April 30, when it became available to all users, I unfortunately have this picture, what should I do? Thank you

I often use constraints option when I work with my design but now with the new beta UI Figma I didn’t find it now It’s hard to make my design responsive without having to option this, not only hard, it’s impossible without having that, why are you taking it away?, I prefer the old Ui Figma when you come across to change your UI just don’t take away features.

Hello dear Figma team, I have been using Figma with my partner for many years. My previous partner stopped using Figma and we had to pay $40 and the payment was late.Then he left the team. I cancelled my plan and re-activated it but it still asks for $40. It is expensive for me. Please help me to continue by paying only $20.

Hey I just started to use the figma site and the engineer on my team want to be able to assess the dev mode on it.Eventho i already granted him the “editor” permissions.still he can not find the dev mode option on the site.Does anyone has the same issues?

Hi, I was going to build small site for an Advisery client, so nothing too content heavy or CMS reliant. I know Figma and a little bit of Framer. Framer doesn’t give me any option to host on Serversaurus which I need to do. Can I do this if I build in Framer Sites or is Framer Sites self-hosting as well?Also concerned that Framer Sites is so new it may not be reliable enough for what I need. This is an example of the type of site I need to build from a content perspective https://www.creativeclimate.org.au/I am a designer with limited coding knowledge and a budget under $5K. cheers.

So I created my forum username too fast and made a typo! 😅Can someone please DM me to change it. 🙏🏼

I have a library with several components made up of smaller components. Those smaller components should never be used on their own. I want to make my library available to another team but I don’t want the sub-components available. Here is an example: I have a chart legend that I use with three different chart components. I want the user to be able to add a chart component to the page but I don’t want them to be able to add just a legend component to the page. I want the legend to be a component for me so that when I update the look, I don’t have to go update all 3 chart components. If I leave the legend component accessible, I know some non-designer will try to misuse it and stick it on a page as some kind of fancy list or something. 

I’ve created separate collections for alias colors and component colors. Within the Alias Colors I have both Light and Dark Modes.When I try to apply the dark mode alias colors to the dark mode component, I can only see the Light Mode colors from the dropdown.This is new behavior. Earlier this week, figma was recognizing that I was in a dark mode column for the component variables and applying the corresponding dark mode alias color. Has anyone encountered this?  Is this a bug?   

Ayuda, se eliminó de forma inesperada una archivo. Al entrar al link me sale lo siguiente: Es posible que este archivo se haya eliminado movido o no esté disponible. Es de mi propiedad pero nunca lo eliminé, tampoco esta en archivos eliminados. Es un archivo de la universidad, necesito recuperarlo, nadie del equipo lo borro.

 The old one without presuare adjustment was pretty, but new is sharpness and unconfortable. 😣new😀old 

Hi there, I’ve got an issue with fonts in our organization. We had some fonts that had issues with their metadata as shared fonts, so we replaced them with new fonts with the same name & style but fixed the metadata (inherent font weight, bold, italic etc). But after replacing i’m getting the missing font prompt in a lot of files, and i’m unable to select the font to replace with as well. This effectively renders every text unusable as i can’t edit the text unless i change to a random font. Tried reverting as well in organization fonts to the old fonts with the wrong metadat but that made it even worse and every file got the missing font prompt. This is quite a serious issue and I don’t know how to resolve it?