Report a Problem

Hey all, I’m trying to see the effect of splitting our DS library into 3 separate libs (Styles, Icons and Components). The thing that bothers me the most - and I’m pretty sure it is a bug - is that you need to select the internal icon of the component in order to see the available icons. See for yourself: I feel this shouldn’t be necessary! Have you seen the same behavior? Edit: Wow, didn’t know the Windows snipping tool was recording the sound as well 😅

After your v1.92 update, old objects with gradient no longer receive the “gradientStops” data, while the newly created ones work well. I think you might need to run a data migration for older objects as copy-pasting old objects does not solve the problem.

I noticed some slight layout shift in my prototype animations, and found that there is some extra scrolling happening that gets reset when animating between Frames. I found that even when scrolling is completely turned off, the Presentation mode will still scroll to the left and down a bit. My design extends to the edge of Frame, and scrolling is off, but when I scroll, these thin white bars slide into view from the bottom and right sides: Is this a bug, or am I missing something? Thanks!

Hello i have a deleted file that i can’t delete. I can only duplicate to the draft. I’m the owner of the file.

Hi, Has anyone else noticed the bug where duplicating files doesn’t copy over the variable modes? I’ve set up desktop and mobile modes with tokens, but when I duplicate the file, the modes in components and parent frames disappear, forcing me to add them manually everywhere. Cheers!

The alignment and size of layers (mostly text layers it seems) is miscalculated until I (ctrl+) click on them. Not doing anything else other than clicking and then that triggers some calculation which corrects the dimensions. See the .gif attached

I was copying and pasting a few square shapes around when I noticed that one of the copies had merged into a single vector shape, with each area of the shape filled with a different color. I didn’t think this was achievable through manual editing of a shape. Typically, a vector can only have one single fill color (although I’ve been hoping Figma would release a feature to allow the same vector to have different fills). This shape is fully editable as a vector shape, and the colors can still be changed to different values. What’s going on here? Has anyone else encountered anything like this before?

If I’m not on the page when I right click and delete it I get ‘Figma ran into a problem’ page with Error ID: 634dad50350f4e898ee66176bb2ccce9 Had this over multiple files and multiple days.

There is a layer that appears to have a linear gradient fill, but when you access the fill property through the API, the gradientStops value is empty. Unfortunately, it seems that dev mode is unable to get it either. This issue has been ongoing for a while now. Is it possible to fix it quickly?

The gradientStops is empty array

I can’t select branches I have made. I can only access it when the view of my project is in grid view.

Today I try to get color of gradient linear, but I can’t get ‘gradientStops’ like this Yesterday it was still normal .

在网页版的Figma无论登录与否，内容中的文字会发生偏移，包括软件自带的Ctrl+Shift+C以及导出功能的两种导出方式，无法供团队其他无客户端的人员看，

Please see. The first bug in page variables: The variable name should be אבג instead is גאב (I types אבג) The second bug, in nested variables. It should write כותרת instead is תכותר Very strange.

Can’t click on Recent Items to open them. The only thing that works is to use Right-click OPEN. This is a bug, as it was working correctly previously. I’ve cleared my cached and restarted/logged in and that doesn’t fix it.

SectionNode does not seem to have “corner radius” exposed through the plugin api. I would suggest this to be added in future release.

This image shows variables “color 1” selected all color scoping. This picture shows Variables “color 3” can not display at “color style - edit color style - custom - libraries” panel. And i can add a gradient that have variables to “The style”. but, i can’t find the other stop after i add this gradient to “the style”

Each time I rename a column in the variables it freezes everything and I need to reload the tab.

I’ve been making use of the new variable places to set up a robust typography system, however adjusting say the font size won’t update the layers that use it unless you do any change in that layer’s hierarchy which then prompts an update of the layer. This is quite annoying for the initial setup of new variables, but also sometimes the variable modes don’t change things either. It sounds to me like text layers aren’t on the list of things to automatically update when a variable gets changed. This is a pretty big issue with using these variables, so hopefully this gets looked at.

Hey guys, I have a more complex file, lots of nested components and variants. My huge problem, which would practically kill this whole project, is the fact that I swap instances (manually) for certain components and some of them, ONLY SOME OF THEM are swapped back after closing Figma. So when I open Figma again, only a certain number of the components that have been swapped remain swappred, the others return to the original component. How in the world can I stop this from happening?

Hello, I have an issue where the text label inside of some of my component variants are not loading. I have a guest-status and key-status tag component with different variants and I assigned these to different variables depending on the mode of the card they are displayed in. In the file with the main components, they are displaying fine, but in other files where the library is enabled, the correct variant is showing but the labels inside the tags are not. If I detach the card instance, they suddenly appear again and also stay when I hit command Z. However if I go out of the file and go back in, the labels are not displaying again. Can you help with this bug?

Hello there. My devs and i encountered a problem where we have a defined style guide components however the line-height value became different from the style guide than the one on the edit mode even if both the line-height were set to auto. When I handed the style guide to my dev team, the auto line height became 14.5 but on my end on edit mode it’s 15. I was wondering if this could be fix as this has caused massive confusion on the dev and design team side. The font in question is Inter in size 12 with Auto as line height. Edit mode Local Component (Style Guide)

Hi all, I am running into an issue where my prototype is previewing and displaying correctly for me, and not for some users. The issue is specifically related to hover states for certain objects. Below are 2 videos showing how they are behaving differently. As I can’t replicate the issue, I can’t figure out where the problem is. Any help would be much appreciated!! Figma – 18 Mar 24

Variables are reset when updating within shadow styles. I have a style that contains both Drop and Inner Shadow. The values ​​inside them are associated with the file that contains the variables for Offset-X, Offset-Y, Blur and Spread. After making edits to this library with values ​​and updating it inside the file where the shadow styles are located, the values ​​of the variables disappear.

1. Describe the bug/issue you’re running into? Can’t draw arrows on imported images 2. Are you able to consistently reproduce it? If so what are the steps? 3. Share a screenshot, recording, console log, link to the file, etc. 4. Is the issue only happening in desktop app or a specific browser , or both? only tried on figma app 5. What OS/version and/or browser/version are you using? Big Sur 11.2.3 - Latest version of Figma