Report a Problem

HiI want to turn the Simplify instances off for +400 components at once but it’s impossible!But it was possible to turn this one with one action. What can I do?

For several days now, masked rasters have been scaling to fit the width of the mask, FIT to mask size. It's ridiculous. Macos SEQUOIA 15.0 (24A335), FIGMA 125 0 8, IMAC 2017 

First rectangle with radius 40Second rectangle with radius 0Result of subtractionDear Figma team, I hope you are doing well, I have found an issue when I have tried to subtract rectangle with radius 40 with another rectangle with radius 0, I expect the subtraction will be with the same radius “40” but I found one edge with 40 radius and the other one with 0 radius.Another notice when I rotate the rectangle “with radius 40” 180 degree and then I subtract it from the rectangle “with radius 0” the result of subtraction was the two edges with radius 0.Rotate rectangle 180 degreeResult of subtraction after rotationI hope guys that you fix this problem.ThanksAloloGamer

Dear Figma Support Team,I hope you’re doing well. I’m reaching out regarding two critical issues I’m experiencing with my Figma Community files:Lost Files – I recently noticed that all my files on the Figma Community have disappeared. I can no longer access them, and they are not visible on my profile. Reupload Issue – When I try to reupload the files, I encounter an error preventing me from restoring them.These files are essential to my work, and I’d greatly appreciate your assistance in recovering them or understanding what went wrong. Please let me know if you need any additional details to investigate this further.link: figma.com/@mqdesigns Looking forward to your prompt response.

I am working on a project that involves pixel art. Due to the nature of the project, it is important that assets exported by Figma are unaltered from their original source images. Until recently, there were no problems: Figma exported PNGs identical to the assets originally uploaded.However, today we have discovered the any new file uploaded to Figma is being exported with pixelated results.Here are screen shots showing the difference between the source image and the one Figma exports. As you can see, the Figma-exported file appears to have been anti-aliased or gone through some other image processing that has generated a large number of new pixels in new colours/transparencies. If you look at the palette on the right, you can see that the original image only contains a handful of colours, while Figma’s new image contains many, many more. These differences might not be apparent when exporting, say, a photograph--but they are very obvious on these small pixel art PNGs.At first I thought

I have disappeared a new rounded interfaceHow to return it, it appears only if you turn the panels. There is a new interface in the settings How to returnHow to return 

I created variables for font sizes and line height. I then created styles that use those variables. An issue is present if you have different styles for mobile and desktop. Styles the first values for the first mode listed which leads to incorrect values displayed. In the attached video you can see the font size and line height are are 48 & 51.5, but the values displayed in the style section are 54 & 54. Detached style displaying font size 48 & line height 51.5 Style showing font size 54 & line height 58 

Hello!Recently I faced an issue which after I copy & paste a section, all those components with variants aren’t place in order. This issue happen on last Friday (14 Feb 2025), before that has no issue. Please do refer the GIF image below.  May I know what’s the problem caused this? Appreciate if anyone could solve this issue for me, thank you very much! Regards,Kwan.

Hi! New Figma feature ‘coordinate system’ doesn’t give me to copy files and paste them normally to another files. Cause it put everything in one corner. It is not good. 

17.02.2025 we have lost our project SmartHire with all files within  it. There is no project in the trash and so we are not able to restore it. Now we only have link to this project. Could you help us to restore it please?

when i’m placing a picture that is larger than the slide itself, in desktop it looks like it’s clipped automatically to the size of the slide. however when i’m presenting the slide on mobile, the entire image is presented, not clipped. I tried to put it inside a frame and apply clipping mask on it, and it didn't work - it still shows the entire image. I had to crop it so it will work when i’m displaying it on mobile. please fix that. 

I’m working from an Antd component library. Recently, the components stopped showing overrides. Instead, it shows ‘component documentation”. I’ve tried clearing the cache and restarting. I’ve reverted the component library to 3 months ago (when the problem didn’t exist). Not sure what else I can do.  

Hello,I reached out to technical support regarding an issue with transferring a project or team from another workspace. (ticket #125939)  However, I received an automated response stating that I am on a Starter plan, while I actually have an active subscription on the Pro plan.How can I resolve this issue? 

When I tried to open the desktop application at night, it showed up like the picture. When I opened it in the afternoon, there was no such problem. When I deleted and re-downloaded it, it still showed up like the picture, but it still worked on Google Chrome. Can anyone help me? 

When applying a negative spacing in autolayout, Figma ignores existing layer order and displays lower layer on top of a higher one.In this example, `Label` frame has a non-transparent white background and should be rendered on top of the `Duration` layer, but it’s not: 

Hey there,At any given frame for me somehow, whenever I set the orientation to make it “landscape” with 90degrees, the newly created auto-layout frames inside will change it’s direction as well, not just at Width-Height but the Layouts as well.Selected A4 paper as frame Set 90degrees to make it landscape Created two frames inside which I want to work with, didn’t change the orientation, Applied auto-layout, immediately see the Layout shows “horizontal”, but I made it clearly vertical, If I set the Width to ‘fill’, doesn’t do anything however, If I set the Height to ‘Fill’ it will be wider and filled horizontally and vica versa (Height is not doing anything but Width changes the Height like image below)This is something which I just found out because I thought it’s a one time problem but it really comes back over and over again.   

When I don't rotate it and after that I scale it, that frame snaps to pixel by pixel and when I rotate it, it doesn’t snap to pixels, rotation is affected too (Sorry I don't know how to explain this) 

Hello! I have created a branch of my design system to introduce the variables feature. Bug fixes still happened in the main file. Now I’m done with the variables and I want to merge them. But when I start to fix the conflicts, Figma gets stuck. No matter if I open it in the browser or in the standalone app. Reloading it doesn’t help either. Figma memory is still green with a maximum of 44%. Is there any way to automatically settle on “keep main” to bypass the conflict modal? Maybe there is another solution that will help me. Many thanks! Matthias

I did download the FigmaBeta. Still I do not see the option. What I get to see is Text To Design Option How do I get the AI option with that magic wand icon. I do not also see anything to change under settings. 

Hi guys,I am a new user to Figma, specifically FigJam. I am using it to plan some projects and have noticed issues with the syntax highlighting for the code block in FigJam.  The issue can be repeated by copying and pasting code which results in blank spaces being placed after the line delimiter. After checking on the forum it seems that this is a very old problem. I am curious as to why it hasn’t been resolved yet. It is quite annoying in our use case, as we are doing micro-service architecture.  Is there any solution aside from having to manually delete the white spaces? I have noticed when keeping the code in a separate application, in our case Notion, using the copy function on Notion and pasting into FigJam it *sometimes* works and doesn’t include the blank spaces. Not a critical issue but very annoying.

.

i choosed the optionn ”everyone with the link can edit”. when  sending the link to the persons they cant edit, they must setup an account! whats this, why lie with this option?? thansk for wasting my time. 

Does this happen to anyone else? It’s literally killing my eyes and brain.Ever since they introduced UI3, depending on what you click on, basic information like position, layout, appearance and other key information moves around. So, every time you click on something new your eyes have to become used to the new position before you get to do anything.Those microseconds are very taxing for people that work 10 hours per day, every day on Figma.I thought it was just because I hadn´t adjusted to the new UI but it has been months now. Its 7 PM and my eyes are completely destroyed after a full day of work.Please help us fix this. Please. This is not good UX. Way too much mental and physical load.  

Hi Figma I have a classroom of students who have been working with figJam since Sept. In the last week, we have encountered an issue in which some chromebooks are able to see the figJAM and some are NOT able to.This issue only presented itself sometime within the last week. Below you’ll be able to see that the platform and firmware versions are different, as well as the javascript version. Can you please have one of your technicians look into this and see what type of fix we can do? Thanks so much!Sean Here’s the information for chromebooks that CAN see the figJam: Google Chrome 132.0.6834.190 (Official Build) (64-bit)  Revision 8d3aba4371382e680516934a73030efe35f5828b-refs/branch-heads/6834@{#4583} Platform 16093.86.0 (Official Build) stable-channel octopus Firmware Version Google_Fleex.11297.432.0 Customization ID fleex ARC 12899595 SDK Version: 33 JavaScript V8 13.2.152.37 User Agent Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Geck

After publishing the component library, sometimes and in some places that are using these elements, they are completely broken and when clicking on them they return to normal, so I believe it is a bug. Has anyone reported something similar? Does this have a solution? It ends up disrupting the daily workflow.I've already done the troubleshooting reset and reloaded the window