Get Solutions

In the previous version i can able to paste the vectors as vectors from adobe illustrator but now it’s not working its getting pasted as image.. IS anyone facing the same issue??.. how to resolve this because that helps a lot

This is the worst bug I’ve never encountered, not sure how did this happen and even pass the quality check:Horizontal autolayout functions as vertical autolayout. I need to click bottom left aligned to let the component act as top left alignedYou can check the attached image.

Hi Everyone,i having the following problem:i purchased FigMa Full Seat (professional plan) license for [redacted by forum admin/moderator to remove PII] account on 11/9/2024 > Then, i purchased additional Full Seats (professional plan) for the following daily accounts:24/6/25: [redacted by forum admin/moderator to remove PII]16/7/2025: [redacted by forum admin/moderator to remove PII]28/7/2025: [redacted by forum admin/moderator to remove PII]=> So how are the licenses of these accounts calculated? Are they considered the same organization, the same Team? Because i added the accounts [redacted by forum admin/moderator to remove PII], [redacted by forum admin/moderator to remove PII], [redacted by forum admin/moderator to remove PII] to [redacted by forum admin/moderator to remove PII] Team and were charged for the added accounts? Why were they charged? Please explain this problem to me.Thank you,

Hi Figma Team,I tried accessing the Education Plan page, but received a “Page Not Found” error while trying to verify my student status. (Screenshot attached.)I’m a college student without an .edu email. I’m happy to provide my student ID or admission receipt to verify my status.Could you please help me access the education plan?Thanks,Ruchi 

Hello Figma Community,I'm working at a telecom company where we're going to conduct usability tests using a Figma prototype with the help of Useberry. We created a simple prototype for the number-purchasing flow. The buying process should work as follows: the user starts from the numbers page, where they should see a large selection of numbers (up to 200), organized into categories. Based on their needs, they should be able to choose only one number. However, in our prototype, we can’t restrict the selection to just one number — instead, it allows users to select multiple numbers. Could you provide step-by-step instructions on how we can fix this? On the same page, we also have a standard cart where the system should display the chosen number along with its price, the category name, and the tariff included with that number. Additionally, the user should be able to choose whether they want an eSIM or a physical SIM. And if they select a physical SIM on the summary page they should be ab

I can not find Push changes to main component when i click on component instance 

Hi everyone,I’ve been running email campaigns for a few months, but I’m noticing that a significant portion of my emails isn’t reaching recipients’ inboxes.I want to improve engagement, reduce bounce rates, and make sure my messages are actually seen. I’ve heard that there are multiple strategies involving authentication protocols, list hygiene, and content optimization.Could anyone share proven tactics to increase email deliverability? Are there tools or best practices you rely on for maintaining sender reputation?Any insights or personal experiences would be greatly appreciated.

Hi,I created and designed some pages for my portfolio in Figma. As one of the last steps I wanted to include a navigation bar. Which should look different on Desktop, Tablet and Mobile:Desktop and Tablet: it should be a floating/sticky Element on the top Mobile: It should be a classic Element with a burger menu, when you click on the burger the menu should appear.I created the navbars for each device/breakingpoint as a component I created an component set for all these navbars (including the variant for the open mobile version) I added an istance to the desktop page and on tablet and mobile the correct variants appera But when I preview it, and then go to the  mobile view and open the burger menu and then switch to tablet or desktop view the mobile navbar is still there. Also when I close the burger menu.  Check out the video which shows what I am struggle with. Thank you in advance :)   What did I do wrong? 

We are experiencing a critical issue affecting our team and our clients:Out of nowhere, when trying to edit a text layer, Figma suddenly shows a “Missing Font” warning. The file had been working perfectly for months — no changes were made to fonts, library, or system settings before the error appeared.When we relink the missing font to the correct local font, all connected text styles lose their hierarchy. Text reverts to default settings, and we have to manually reapply all styles across the entire file.Critical for us as a service provider because our clients rely on Figma’s stability for ongoing projects and working with libraries. Context: System: macOS, Figma Desktop App, latest version Fonts are correctly installed locally on all machines Figma Font Helper is running on all devices No changes to font versions or system configuration before the issue started Trigger: Simply selecting and editing text in a long-working file  Right now, we can only tell our client to not upd

Bonjour,1 : comment vous faites pour qu'un fichier figma soit interactif ?2 : dans le même fichier j'ai plusieurs planches est ce que c'est correct ?3 : pour faire l'interactivité j'enregistre le fichier principal sous un autre nom en gardant que la page que je veux. Est ce que c'est correct ?

Hello, while prototyping, Figma only understands the vector, images and text, how to allow figma to under stand a combination of all of this as a one button (like the photo attached), so once the user press on any element of this button it will activate..as you see in the below image, there is an option to select the language, but Figma only can select the arrow or one single element at a time, so shall I make the whole vectors connection? or is there a way to combine it into one button?. Thank You  

Is there a way to add Figma as a model provider into Xcode 26?

Hace dos días recibí un mail diciendo que en 4 semanas se vencería mi plan educativo y que tendría que trasladar todos mis proyectos a otra clase. Yo inicie con el plan educativo en agosto del año pasado y lo volví a solicitar en marzo de este año porque me decía que ya había vencido. Quiero hacerlo ahora también antes de que vensa pero me da error de verificación 

Hello, I recently started lerning FIgma. So when I was making the calendar, I decided to add a highlight effect for selected cells. When you click on them, they get bigger and start to highlight. I did it with buttons. So, is it possible to place all the calendar cells at the same height along the z-axis, and when you click on them, raise the active cells above the others, and so that they are also at the same level (the active cells should not cast a shadow on each other, as in the screenshot). I tried to find something on the google, but there is nothing similar.Thanks in advance for your help. 

I’m rebuilding a load of our components, and was hoping to make a top navbar component that can display any nav item tab as selected without having to resort to making a variant for each item showing as highlighted. I’d like to have a single navbar component, with a sub-component for the different states of the tabs (selected/unselected), and then just use whatever functionality Figma offers to allow a single dropdown to select the live tab.I can see that it’s possible if I expose properties from nested instances, but that then means I display a full list of each menu item as a property, and all have to be switched off apart from the selected one, which is clumsy.I’ve currently settled on an unsatisfactory compromise where I’ve build a single navbar component, and then made a nested component for just the tabs themselves. I still have to then make a variant for each of the nav items, albeit just for the tabs and not the whole bar. Is it currently possible to do what I’d like?

FigmaSitesでテキストを左寄せにしているのにセンター寄せになってしまいます。以前は問題なく表示されていましたが、最近不具合が起きています。 全てのテキストで同様の不具合が起こっているわけではなく、以下の場合に発生しています。コンポーネント化されている テキストを塗り・左寄せに設定 改善を願いますが、対処法はありますか？

How do I import figma make into figma design to make edits personally?

1. Describe the bug/Issue you're running into? When typing Chinese characters in FigJam, certain characters are rendered with an incorrect, condensed width. For example, the character "关" (guān) appears squished and is visually inconsistent with other characters in the same text box. This seems to be a font rendering bug that affects multiple characters.2. Are you able to consistently reproduce it? If so what are the steps? Yes. The issue is consistently reproducible. Steps to reproduce: Open any new or existing FigJam file in a web browser. Select the Text tool. Type the Chinese phrase "关于正常字体的宽度". Observe the character "关" in the text box. It will have an incorrect, condensed width. The issue persists regardless of the selected font preset (Simple, Bookish, etc.). 3. Share a screenshot, recording, console log, link to the file, etc. 4. Is the issue only happening in desktop app or a specific browser, or both? Both.5. What OS/version and/or browser/version are you using? OS: m

Hi, I'm new to Figma. After creating a site design under “site,” I am now trying to import the website into WordPress with Elementor via UIChemy. After much research and trial and error, I have noticed that UIchemy does not link to Figma “site,” but rather to Figma “design.” How can I get my designed site imported into WordPress? Is it possible to link directly to “Site”? That would make the most sense, right? Or what other options do I have?

Good day!Why was the option Show behind transparent area removed in the Drop Shadow effect?This made the work very difficult ( [The title of this post was updated by a moderator from “It was good function” to “Missing ‘Show behind transparent areas’ option in Drop shadow effect” on 20-Jul-2025.]

When importing SVGs stop converting <circle> tags into <path> tags.Please stop. It breaks my workflows.Please please overhaul your SVG engine. It is so buggy and broken.

I’m working on a brand identity project and trying to recreate the gradient effect you see in my logo (screenshot attached). The effect looks more like a multi-stop brushstroke gradient rather than a standard linear or radial gradient. It has depth, sheen, and a slightly “painted” look with multiple breaks in color—ranging from deep purple to aqua, orange, and pink.What I’ve tried so far: Standard linear and radial gradients → looks too flat. Multiple fills with blending modes → closer, but still not capturing the depth/brushstroke feel. Paint-style plugins (e.g., gradient mesh / pattern overlays) → not quite matching the richness. What I’m hoping to learn: Best practice in Figma (or via plugins) to recreate this type of multi-stop brushstroke gradient. Whether I should build it with gradient meshes, noise overlays, or multiple layered fills. If anyone has a recipe (specific stops/hex codes) or a technique they’ve used for similar “painted gradients.” Goal is to keep this edita

I have a button component with dozens of styles/sizes/variables. For icons in the button, I used to use icons from one library, but I recently tried to switch to diff icon set.  The standard icon size is 1 (16px), but for other button sizes, I want icon sizes 0.75, 2, 3, etc. However, when I try to update the icon instance in one of the button variants to Size 2, Figma changes ALL instances of the icon to Size 2 across all my button variants. I’m super frustrated. Anyone have ideas to address this?

Hi, on a ComponentNode (inside a ComponentSetNode) the node property variantProperties has been deprecated (https://www.figma.com/plugin-docs/api/properties/nodes-variantproperties/) but is there no other way to get the active variant properties of a component node? The doc suggests use componentProperties instead but that node property does not exist on a component node inside a component set node.

I am a student at INSAT (Institut National des Sciences Appliquées et de Technologie, Tunisia) and I am currently using my official university email address (@insat.ucar.tn) to access Figma. However, the system does not recognize my domain as eligible for the Education Plan.Could you please review my case and add @insat.ucar.tn to the approved education domains so that I can benefit from the Figma Education Plan? I can provide proof of enrollment if required.Thank you for your support