Ask the Community

Hi Figma team & community, I’m managing a design system and I wish to make a massive update to make it lighter to improve performances on our design files.With variables and components variants, there are infinite possibilities on how to create components. The outcome components will likely be a mixed between variables and component variants, but when I can prioritize one versus the other, I would like to know what will improve performance based on how Figma is structurally built?   Performance rumours:— One one hand, I’ve heard that pasting a component instance in a file brings all its variants with it. So having 2 instances of a component with 8 variants, would equal having it 16 times in our file, which increase its weight. — On another hand, I’ve had very complex and massive prototypes in the past, and at some point when I was having many many variables, it started to crash and not render/take-into-count all the variable rules and logic as it was lacking memory.  Approach optio

When evaluating hardware upgrades, selecting the right memory is critical for performance and stability. Professionals recommend checking compatibility with your motherboard, supported speeds, and warranty terms before making a decision. In many enterprise and custom-build scenarios, teams prefer to buy memory modules from certified vendors to ensure consistent quality and long-term support. Always review benchmarks, user feedback, and manufacturer documentation to avoid mismatches and ensure optimal system efficiency over time.

I have a Design system file with a component Accordion. As you can see in the video linked below, it has 2 states: open and closed, and inside it has a placeholder component for content. The idea is to replace placeholder with real content when needed.Now I want to use this component in another file, so I replace placeholder with “real content”. When I play it tho, my real content is replaced with original placeholder - and that’s not what I want. BUT, when I start with its state OPEN, then it works as expected. How do I solve this?Here is a video I recorded if that helps visualize it 

how can I escalate a ticket that was opened for over 48 hours?

With the introduction of AI-powered features in Figma—such as First Draft, AI-generated layouts, content suggestions, and smarter search—design workflows are starting to shift in noticeable ways. Tasks that once took hours, like wireframing, copy placeholders, or early ideation, can now be jump-started in minutes.I’m curious how designers and teams are actually using these AI tools in real projects. Which AI features in Figma have you found genuinely useful so far? Have they helped speed up early ideation, improve consistency, or reduce repetitive work? How do you balance AI-generated output with your own creative judgment? Are there moments where AI feels more like a limitation than a help? It would also be great to hear how AI is impacting collaboration between designers, product managers, and developers. Is it improving handoffs and alignment, or introducing new challenges?Whether you’re experimenting lightly or fully integrating AI into your workflow, share your experiences,

I added Figma MCP to my project and also added implement design skill but cursor keeps producing very irrelevant designs. What I need is recreating the Figma design in swiftUI with pixel accuracy. I am ok if it will use PNGs instead of vector shapes. However it keeps looking at screenshots and creating something visually similar yet far from original design. Is there a way to translate Figma design to SwiftUI literally?

Hello Figma community, I’ve used the Figma AI and it generated a window that displayed (Preview + Code) tabs. It’s great ! yet I now want to make it a normal figma project so it’s not a code anymore but a file that has figma pages and components. IS THIS POSSIBLE? please let me know

Hi Everyone, I'm Meenu Hinduja and my husband Dheeraj Sudan, run a business. I’m working on a Figma presentation and I’d like to export video or multimedia content from my slides. I’m not sure what the best way to do this is, and I’d really appreciate your advice.RegardsDheeraj Sudan and Meenu Hinduja

Hi, I’m temporarily in one country but am moving home soon. I need to purchase a paid seat (personal) in my home region but don’t know how to change the region or currency. Please help. 

Scenario: "Link Text + Open New Window Icon" Component Inside a Table Cell Initial State The link component sits inside a table cell. It consists of two grouped elements: Text (dynamic width, labeled “Link Text”) Trailing Icon (fixed size, representing “Open in new window”). The text box and icon are set to Auto layout (Hug contents), so their total width expands or contracts based on text length. User Interaction in the Properties Panel The user begins typing the link text (e.g., “Docs”, “Documentation Page”, etc.). As each character is added, the text field width increases dynamically, and the icon shifts right, maintaining consistent spacing due to the “Hug” behavior. The entire link component grows horizontally within the table cell. Reaching Width Limit / Cell Edge When the growing component nears the maximum cell width (or a predefined layout constraint), auto-layout can no longer expand. A truncation behavior activates: T

How to remove Ai effect and the messy from Ai design completely 

When we want to design a dashboard that is visible without scrolling the entire page, what should be the height and width of this dashboard? Should we also consider the top of the Chrome bar?

My team submitted a help ticket through their online portal, but haven’t heard back in over a week. It’s now an urgent issue that we need resolved asap, so hoping I can find a phone number or any other helpful contact information that helps to get a more immediate answer. Thanks! 

not a native speaker can be mistakesso, im new to this effect and tried it just recently, I checked the forum but didn’t find exactly this bug. I’ll pin the images. I saw on official figma glass introduction that glass in  prototypes work, so I have  problems understanding what I did wrong or why is it happening at all. Thanks in advance! 

I can’t find the nested component on figma rn so that I can change icons for my buttons easily… I can did this in the past :(( Please help mee

Hi all I’m still new to variables so I’m not sure how to do this.I have 2 buttons with 3 variants each:Button 1: off - on - option 1Button 2: off - on - option 2When Button 1 is On or option 1 I want Button 2 to be offWhen Button 2 is On or option 2 I want Button 1 to be off How can I achieve this?

Hi everyone, As the title said, I can’t see the color styles I created in the local file when I create color variables.Also I can’t create a variable with linear colors, is it by design?   

I want to import announcings from a figma node. Is there a way to do this?I looked through the following node names, but couldn't find anything.If you know of a good way, please let me know! Thank you! "data-development-annotations","data-content-annotations","data-interaction-annotations","data-accessibility-annotations","development-annotation","content-annotation","annotation",

As the title states, I’ve built a prototype in Figma and when testing it on my phone links to external sites open, but take my figma app to the ‘recent’ section of the app rather than back to the prototype. Is there a way to have this not happen and stay within the prototype when opening a link? I’ve attached a video to show what I mean.

It seems that I accidentally registered guest seats that I had granted access to, and they have already been billed for a full year. This was not my intention, as I am not able to afford paying for 3 seats annually at once. I only need 1 seat to be billed annually for the next year. I’d like to ask the community if anyone has faced a similar issue. I still want to use Figma Pro, but only for one account. For the additional 2 seats added in January, I would prefer to pay for them on a monthly basis instead.

Hey Figma team/user community,I have this file that I created on my Figma account that lists me as the owner, I still can’t seem to have edit access? I don’t know if it’s another alternative account that created it but I’ve tried a few different emails. Is there a way to find out the true owner email address for the figma account that has access?Am I missing something obvious? This is the only file I can’t access.

Всем добрый день! Такая проблема - использую десктопную версию фигмы, после обновления Мак, перестали отображаться персональные шрифты. На других программах они есть (Word, Illustrator). Перезагружала, удаляла, устанавливала заново. Их нет. Нет, к слову, и в веб-версии. Подскажите, в чем может быть причина?

Hi everyone,I’m creating an interactive form in Figma. The first question has 3 selectable tiles. I want an additional field to appear only if the second tile is selected.I tried using interactive components, but I’m not sure how to set it up so that the extra field only shows for that option.Any guidance or examples would be much appreciated!Thanks!

Ho Do I move the design created by figma AI into editing myself?

Hi all I’ve seen a lot of tutorials but I can’t find a solution for my issue.I want to create an interactive slider with 3 statuses: Off - ON - REDNow the middle status ON should be the default one.How can I drag to left and right on the same component variation?Picture show the first middle variant as default.