Ask the Community

Hello Figma Team,I am trying to embed a Figma Make design into an external website using an iframe, with a URL like:https://www.figma.com/make/xxx/yyy?node-id=0-1&t=zzz-1. However, the iframe does not seem to load, likely due to Content Security Policy (CSP) restrictions.I have confirmed that Figma Photo (Prototype) can be embedded using the same method without any issues, for example:https://www.figma.com/proto/xxx/yyy?node-id=2-1&starting-point-node-id=2%3B1I have been using the following embed format:https://www.figma.com/embed?embed_host=share&url=${encodeURIComponent(originalUrl)}Could you please let me know if there is any way to embed Figma Make designs via iframe, or if there is an official workaround or recommended approach for displaying Make designs externally?Thank you very much for your support.

Hi Figma Community! 👋I'm a graphic designer learning UX/UI design. I posted here before about responsiveness, and I've been studying and practicing. Now I created a new desktop wireframe and I'd like to know if I'm doing it right before I continue with the full design.I want to check three things: Is my wireframe responsive and will it work on desktop, tablet, and mobile? Am I following Figma 2025 best practices? Will it translate well when I build it in WordPress with Elementor?Can you give me feedback on these specific things? Does my wireframe follow Figma 2025 standards?I want to make sure my foundation is solid so my work translates well when I build it. Any feedback would help me improve. I'm ready to apply what you suggest.I've linked my Figma file below.Figma DesktopThank you for your help! 🙏

Just created a pitch deck using the AI feature and trying to export but it only lets me do File>Local Copy to a .make file. I don’t see any Menu Bar either for the Export function.

I’m having an issue in Figma Sites where I’ve made a custom nav bar with figma make and it works as I intended except for the fact that I can’t actually link to the pages on my site. I only have three buttons “Work”, “About”, & “Contact” and I’d like to functionality to work like so.When the "Work" button is pressed it automatically goes to the page titled "Home". When the "About" button is clicked it automatically goes to the page titled "/about" When the "Contact" button is clicked it automatically scrolls to the component labeled "Footer 1"I’ve had mixed success with the first and last item. Essentially it defaults to the “scroll-to” interaction but only works on the desktop portion of my Home page. When the About button is clicked I either get a black screen or a “Not Found Error Page”. If anyone has insights on how I might achieve what I’m looking for I’d really appreciate it! The base code for the nav bar without the above linking interactions is attached. 

I have a component named "Popover Item". On that component I applied a hovered interaction. The layer structures in the component variants are already the same. After that, I inserted the instance of that component into another component named "Popover". Then, I inserted the instance of the Popover component into a "Navigation" component.The prototype runs normally and as expected when I use the instance of the Navigation component on the "Homepage" page. The hovered interaction also works as I imagined. Even when I convert the Homepage page into a component, the interaction from Navigation still runs normally.The problem arises when I create a prototype from the instance of that Homepage component. What's strange is that the icon on the Popover Item instance that I had already overridden to be hidden in the Navigation component, suddenly appears after being hovered. I have checked and I think this is not a layer structure problem. However, of course I can be wrong and miss something.I

Do I have access to Figma sites through my Figma student/education account?Thanks

In Figma Make, is it possible to show a dropdown or display a button when hovering with the mouse?I can see hover interactions working when the button color changes or the design updates, but I don’t see cases where another button appears by overlapping layers on hover.Is this something that can only be seen after publishing?

HelloI’m working on a carousel animation with a smooth transition. I’m having trouble getting it to work quite right — I can make it move from one image to another in one direction of the carousel, but not the other. I want a sliding, drag-style transition between the images.It is supposed to have a round curve on the animation.Thank you in advance for taking the time to read the above. I hope someone can help me.Project link:  

I am reading through OAuth support for Figma Plugins: https://developers.figma.com/docs/plugins/oauth-with-plugins/#saving-the-access-token-locally One thing I am confused about is how to handle refresh tokens? Should the Figma Plugin frontend store the refresh token along with the access token and handle refreshing at the proper time, or should the plugin backend store them and handle it? I feel like storing the refresh token in the Figma Plugin frontend is not great for security, since some OAuth providers might require the client secret to be sent along with a refresh request. If the backend handles refreshing tokens, I see a couple of hurdles:do we need to generate a new read key for the plugin to poll? how does the backend know what access token it is refreshing? Do we send in the current user ID or the access token we want refreshed?It also seems to go against what the documentation says, since it states that the server should delete the access token from the server after it has

Could you please let me know if there are plans to make a Figma app for iPads? And if so, when is it expected to be released?I’d really love to be able to work in Figma on an iPad the same way you can on a computer!!!!!

I’m pretty sure the real answer is “don’t set up your components that way” :P but I thought I’d ask in case its a bug.I have an open branch with a main component, and I copied an instance of that component over into another branch, both under the same master. (Branches will remain unmerged until the dev work is complete.)When I click “Go to main component,” instead of taking me to the branch with the main component, it just drops me on the first page of the master file.Is it because it’s bad practice to reuse components across unmerged branches--they don’t count until they are merged and published? Or is this a bug and it should be able to take me to the branch containing the main component?

I’m trying to clean up how shared configuration data is handled in a Unity project and wanted to sanity-check my approach.For things like gameplay tuning values, item definitions, and balance parameters, I’ve seen both of these patterns used: Static data classes with constants or readonly fields ScriptableObjects used as data containers, referenced by systems at runtime I understand the general benefits of ScriptableObjects (serialization, inspector editing, asset reuse), but I’m less clear on the tradeoffs once a project grows in size — especially around testing, version control, and runtime safety. In practice, when do you consider static data classes the better option, and when do ScriptableObjects clearly scale better?

  안녕하세요. 대학 다니고 있는 학생입니다. 다름이 아니라 피그마를 사용하는 도중 학생 인증이 종료되어 다시 인증을 받기위해 여러 번 시도했지만 한도 초과만 뜨고 인증되지 않았습니다. 학생 신분이라 자금이 마련되어 있는 상황 아니라 한 번 더 학생 인증을 해줄 수 있는지 여쭙고자 합니다.

a new files , why the assets show it here ? it strange 

Hello, I am currently working on a grocery delivery app. This is one of my first projects, so I do apologise if this is something silly to ask.I am kind of stuck on the prototype phase, where I am trying to enable the user to pick a day and time for the food shop delivery.What I want from the design is:when user selects a time slot for a certain day, I’d like to swap the text “Pick a delivery slot” to an interactive button “Continue with selected slot” (I’d ideally also like that button to say, which day and time it is, but I can’t even get it working on its own) highlight the selected time box.So far I’ve tried:creating a component (time box, like £0.50 or free or X - see attached image) and telling it to turn orange when tapped, that works okay  I used that component in my variants with the whole frame with the times (see image - everything but the “time” column) - it works fine I tried adding an overlay, when same button tapped, however unless I select “close when clicking outside”,

Hello! While trying to publish a new version of the plugin we were asked to add 2fa to our hello@viewst.com account to get the possibility to publish a new version of the plugin.  But after we add it and try to publish a new version, we get a new error message "We detected a change to your account details. Please contact support@figma.com to proceed" that blocks our possibility to publish a new version with fixes of our plugin.  And now we are stuck in this state for 2 weeks and couldnt publish fix to plugin (case plugin account inst paid one and we cant reach support, and our primary paid account couldnt get help while its different account issue)What could be our next steps to resolve it?

I have this figma file that has an animation in it. I want the animation to be converted into a lottie animation for my react-native app but I am stuck since only the first frame is getting covered. What shall I do?In both prototyping play and preview mode, I get the full animation, the problem happens when I try to create a Lottie file for this...

An error occurred during posting: Something went wrong, refresh and try again.

Hi guys, may i know where to get the web link, because we want to transfer the ownership of all folder project figma to new company account. I’ve read all documentation still no clue how to get the link.  

I would like to use Figma Make to prompt the creation of slides that I can use for a presentation. Usually what is first generates is in the right direction, but I want to be able to then edit directly on the slides (i.e. without vibe coding). Is that possible? If so, do I need to move it into Slides first? How do I do that? Thanks! 

I’ve been doing a form mockup using the Atlassian Design system, and I’ve encountered the following error when viewing it as a prototype, involving the drop down menu element.The field looks normal before hovering over it.It shrinks to this width when I hover.It returns to the correct width when clicking, but the text in the field defaults back to the default text that the component has when you first place it.I’ve tried switching the states to define the width as “Fill” for each of them, but it doesn’t carry over to the prototype view. I’m also have the same width issue with date picker fields when hovering over the as well.Is there any way to correct this?

I can’t seem to find a way to turn off the red measurement tool. If I go to View > Hide UI it does remove it, but it also removes other side navigation components that I need available.   

Hello guys, I’m trying to activate the Figma Education plan but I’m stuck:  Attempting to verify shows “Verification Limit Exceeded.” I reached out to SheerID, and they responded they were unable to process my request and that the ticket is permanently closed. So I can’t retry from their side.  I also tried to email Figma education team but still got no response at this point.  Thank you so much   

I am not able to publish plugin for free on figma community as on “Add Final Details” tab there is one mandatory Price field which is disables and no option is visble to turn off the Price field, so I am stuck on that last stage not able to move forward, can anyone help me? in manage plugin next to it only "Development" is written and I have all the code files in my local machine