Ask the Community

I have a grid of images as shown below. I plan to apply to variables to each image - an “x” variable, and a “y” variable - with the values being their x,y position in the grid.I also have 2 buttons, “Horizontal” and “Vertical”, with values that can increment. My goal is; when the value of the “Horizontal” button is 1 AND the value of the “Vertical” button is 1, then only the bottom-left image is displayed, everything else is hidden.The logic for each of the images would be something like;if Horizontal = x and vertical = y, then “Hidden” = false; otherwise, “Hidden” = trueMy problem is that when I apply x and y variables to each of my images, they all have the same value, when what I would have wanted is for each image to have the same x and y variables but different values. For example: the bottom-left image will have x=1 and y=1, the image above that will have x=1 and y=2, and the image beside it will have x=2 and y=1, and so on.Is this possible? Grid of images Horizontal and Vertical

Hej I’ve been using Figma for 5 years now and never had this issue. So I’ve made a small prototype in which I use a component set. In the sketches of the component set I’ve set the button texts for several different actions. However, when I open the prototype to run it and start clicking through the actions, the buttons texts are moved around. So text from one button in one position is suddenly shown in another not related button in another position. Examples 1, how it looks in component set: How it looks when prototype is running: Even if you can’t read Danish, you can tell that blue text link under “Betina” has the wrong text, and the buttom right button also has the wrong text. Why? I’ve never had this issue before. Any good ideas? I’m even fairly certain it worked yesterday 😅

команда Ctrl + C, перестала корректно копировать компоненты и элементы, внутри окна, которое создаётся при помощи клавиш Crtl + S. Во всех других случая идёт корректное копирование.

Hello,I am currently developing a Figma plugin to extract local variables and local styles . However, I am facing difficulty in exporting local variables and local styles from Figma plugin to Figma styles and Variables.Could you please advise if there is a method /API to export local variables and local styles to Figma from plugin?

On my new projects i cant adjust these sliders with touchpad or mouse. Am i the only one who is facing this issue. And is not also effects panel. Same issues are in the linear gradient color wheel sliders RGBA sliders etc.

In the middle of my work, Figma showed me this message saying I ran out of browser memory, and when I opened the file in recovery mode, it shows I only used 2%, any idea what is going on? 

IM NEW AND IM MAKING A GAME CALLED RIDGE I WAS WONDERING IF YALL CAN HELP

 Can someone tell me the difference between these two icons next to components in the layers panel? Thanks!Gemma

Hey ya’ll, I’m working in Figma slides, and adding a live prototype. Here’s what happens: I open the prototype I want from my file, and retrieve the shareable link. The link is not restricted to anyone or anything. I paste the link in my Figma slides. It loads correctly, and has the correct journey selected in the prototype editor in Figma Slides (on the right-hand side, where you can change the prototype). Next, when I go to presentation mode, and click to load the prototype on the slide. It loads the incorrect page. It loads the first page (which is just a cover thumbnail). Please help!

Not sure if anyone can help, but I’ve been pulling my hair out all day. I’m working on a website prototype in Figma where one of the sections is sticky which contains 3 blocks of content half way down the page. It all works as expected until I clip the content on the Services-section frame so everything isn’t visible on the design. Then nothing seems to work correctly at all. I can just about get the 3 blocks to stick, but then the prototype gets locked almost on that section and can’t scroll down or up.  Yet if I leave the frame uncliped it works perfectly.   

Hey Figma team, The automatic addition of a design seat (for which I get billed for) without any warning or alert is a dark pattern I really wish you’d resolve. I pay for a pro account annually and get billed for an extra seat anytime I share a file with anyone else using the blue “Share” button. Viewers (not editors) get automatically added as full seats. I thought the whole point of Figma is to share files easily so other people can view the work you’re doing without editting. Your UX guides people to use the Share button to show projects to other team members who do not need to have access to Figma — just to view it. But to the actual subscriber it auto adds an extra design seat without warning and bills you at the end of the month. This is unacceptable IMO. Am I missing something completely? Or what is the correct flow to share files and progress to with others - artboard exports? Thank you,

I am setting up a Design System and I was wondering if it’s really necessary to create all these Variant e.g. for a Tab Bar or other Components that have a different amount of Items that should be controlled through the properties. Do you maybe got any other best practices for that? I’d just love to make everything a bit thinner that there are not soo many different Variants needed. 

Hi, I am facing issue 404 error since dec 2024 in my peer review graded assignments due to which it's not getting submitted . I cleared the cache, tried in different browser even tried in incognito mode but still getting same result. In the end I reached out to the support team for help but instead of fixing 404 issue they are asking me to fix the code which I do not have access to. The issue has not yet been resolved. They told me to go to VS CODE, JUPYTER NOTEBOOK or R and fix the code. I am not understanding why they are asking me to do this. Anyway I gave up on them as I requested them so many times but no-one seems to be interested in solving my issue. If anyone know how to fix Kindly help. I am rescheduling my date because of that.

Hi, I have found similar entries about the topic but I still did not figure out what the problem is. I want to upload a Figma project on behance and integrate a Figma prototype. But it is always saying the my embed code is not valid. I went to my Figma prototype and clicked on share. There I set it on visible for everyone and clicked on the embed code. I copied it and went on behance. There I started a new project and clicked on the prototype button where I pasted the embed link. It is an iframe link. But it is always saying that the code is invalid. Does anyone know what the problem still could be? This is the link to my project: https://www.figma.com/proto/m4igkFLXpCBhLn55sfvYXi/CAPSTONE_group5_figma_francesca_final?node-id=1240-10150&starting-point-node-id=1240%3A10150&t=jQsewidCut1fLUDZ-1 And that is how the embed code looks like: Thanks in advance for your help 😉

Im having an issue creating a carousel in this project file - for reason when i check it in present mode it the carousel doesnt work? Please can someone assist me on this  Here is the project file    

A travel application will serve as a platform to simplify and enhance users' travel experiences. Through this app, users can plan their trips by booking flights, hotels, and local transportation. It will feature an interactive map displaying nearby attractions, restaurants, and activities. Users can manage their itineraries and receive real-time notifications, such as flight delays or local weather updates. The app will offer personalized recommendations based on users’ preferences and include a social feature where users can share their travel experiences and reviews. Additionally, it will provide basic information in offline mode, making it highly useful in remote areas.

Hi there,I’m taking part in a course in Figma and as a part of it we sometimes work together in a file and we post our work on tasks in a board where all the participants see who did what.It has been 3 times already that someone deletes my work, I am able to restore it with Version History, but can’t see who did it (ofcourse no one is speaking up and admitting to be doing it repeatedly by accident or malice). Is there a way for me to find out?It’s really starting to annoy me.

Any time I set an element to be fixed, it disappears in the prototype mode. It’s not below the fold line, so it doesn’t have any reason to not appear.

Hello, when I try to fill this icon:   I get this: What am I doing wrong? Thank you.

Hi there!Not so long ago we switch our components in Design System from Color Styles to Variables Colors. However, after publishing changes and updating design files, I still can see Color Styles in our components instead of Variables in design files. I assume, It’s because of overrides made by previous designer, but there are way too much mismatches for a just overrides.  First screenshot is from our Design System, where we switch to Variables, so it’s trueThe second one is from Design File with Color Styles Can you help please?Thanks

Hello! Our company has paid for a one-year subscription using the "Professional team" tariff. But the workspace is still blocked. When we try to edit, a window pop up that requires update our payment source. Could you please tell me what it might mean? How can we unblock figma, provided that that we have a paid subscription?

I’m experiencing a strange issue with a Figma file where I’m the original owner. The file is showing an error stating it’s an "Unassigned Drafts File." Upon checking the file’s access permissions, everyone, including myself, is shown as having "View Only" access, despite me being the actual owner. Since the file is marked as having no owner, I’m unable to edit or make any changes to it.

I started a course in December on UI/UX using Figma. I applied for a student account and whiles applying the time I gave for ending the course is January but I'm halfway through the course. Can I reapply for the student account after my student account expires? 

I have created rows and if user select any row basis on that counter will run and delete button will apear. My query is If i selected any row then by clicking on the delete button how can delete a row and counter should change into - (decreasing form).kindly help me.

Hi everyone, just a curious with some feature, in front end side we can do some logic with max and min width using media query in css, like example i want [A] element only show in 580px viewport, but [B] element will show if user viewport more than or equal 580px/590px can achieve this condition in figma? and how?