Ask the Community

It doesn’t let me design 

I just created a new Figma account, but I’ve actually been using Figma for quite a while and am pretty familiar with it. I was hoping to start selling design files through the Community using this new account.But I noticed that the option to sell files isn’t showing up yet. Does anyone know if there are certain requirements before this feature becomes available? Like, do I need to upload some free files first, have a certain number of followers, or let the account be active for a while?

Hello, i have problem, i would to like make a menu for dashboard and prototype it. I would to prototype it like in real menu in programmed live version. So when i select one part in menu then rest part of menu should be deselected, the links of menu should also go to seperate views of application. I have prepare componets for menu and prototype it to one choise, and make componet for menu, the problem is that i can use one option for "click action" for one element. please helphttps://www.figma.com/design/vwEKkbFiclwPZemiM2VecH/Otis-buckup?node-id=11-1129&t=0YD7V1Lc0UTmCqPE-1  

 I have two buttons and they have same animations. I want to first one has same transition like the second one. The first one has hard transition on corner. I'm confused. You can check from here

I’ve created a prototype which has a few flow starting points for different user testing task scenarios. I typically ask the user to click on the sidebar in prototype mode to jump to the different starting points.I have buttons in my prototype which are positioned center-bottom on the page. When users try to click on them, the “previous frame” and “next frame” buttons from the Figma UI appear and get in the way.If I hide the Figma UI, it gets those buttons out of the way, but also hides the sidebar.Is there a way to hide the “previous frame” and “next frame” buttons but keep the sidebar visible?

I have an instance of a button. The button instance is smaller than the original component for padding and height. (manually adjusted to make the button tighter than in other use cases) I have a smart animate interaction between a default and pressed state on the component-level.On the instance, when I press, the instance animates larger (matching the component-level size) and then back to the size it is supposed to be when the Press finishes (on tap event). I know I can fix this by just removing the “while pressing” event from the instance, but I have the same problem with a button beside it that would take you to another page after tapping, that one stills needs the “while pressing” event. How do I fix this?

I know how to make rollovers and the first (original) rollover card I make works perfectly. When I drag out a new instance of the original and change the image, On rollover I do not get the new image I get the original.The only workaround I know is to make a new components every time I need a new card. Can anyone please help me be suggesting a better/faster way 

Hi community!I create a product card component with 2 variants. And when you hover over it, it will switch to the variant below. Both variants have an arrow, and the arrows have the same name as well as the same place in the hierarchy. They are connected with smart animate. I assume that when you hover over it, the arrow will not have any animation. However, when hovered over, the arrow will disappear and reappear. This is a clip of what it looks like when you hover over it. https://www.youtube.com/watch?v=SRa1mFr_61AHow can I make the arrow just stay there? Is this behavior normal?Product Card ComponentArrows in their respective hierarchy.The smart animate set up 

I’m considering a couple options, but I want to know what the community uses :)

I am using a "Starter" license. The team owner has left, so I want to change the team owner. How can I do this?I look forward to your response.Regards,

Hi ! Looking for help:) I created 2 frames (hero and ‘what client says’. Both of them are within auto layout frame - frame 3.What I want to do is to make a chair picture come out off the hero frame yet it is being clipped inside.All of the frames have clip option disabled. What do I do wrong?    

i want to transfer figma pages in flutterflow but i dont see any options.

I’ve noticed an anchor point occasionally appearing when selecting a shape or frame. However, I haven’t figured out how to access this feature consistently, it seems to show up at random.  

In Buzz Bulk Create, every time I want to make a change to the data in my spreadsheet, I need to reconnect all the data fields to my layers. Is there a way for Buzz to maintain those connections so I can refresh my data and not have to reconnect every single layer all over again?

In Bulk Create, I have been unable to select an image layer that is behind another image layer to connect a data field to it. Is there no layer panel in Bulk Create mode?

When using Bulk Create for text fields, I’d like to be able to designate certain text as italicized within the spreadsheet. If it were markup, it would look something like this: “This is a Headline. <i>This is a Headline in italics.</i>” Thanks! 

I am very new to Figma and working on my lo-fidelity prototype. I am not sure why my prototype tab keeps vanishing ?

 Hello, sorry if the image is bad quality, i just want to know if i can make the dropdown animation display correctly within this frame, is auto layout the issue? i dont know what else to add, i hope the screenshots are enough.

Has anyone successfully migrated their Make project code to Cursor or VSCode?If so, what steps did you take. 

I am using the Utopia plugin to generate steps and spacing for a design. What I’m now looking for is starting small and using a variable or token for say, an h1, but I would like that h1 to be reflective of the clamp font size relative to the frame width. So for a mobile design the font size should be closer to the minimum font size, while a desktop design would be closer to the max, or all the way. Hope that makes sense! Thanks.

This new accessbility contrast checker was added so you can see it when selecting a hex color directly on an object, but however, when you edit a Style color, this accessbility feature is completely missing? Why isn’t this consistent, so you can always see the accessibility contrast? 

When Variables was released I created some collections for testing. Since then I settled on a final version but the old deleted collections still appear in the page/layer selection on the right panel. The same is happening to deleted modes.

Hi All!Am using Figma desktop for Mac version 124.7.4.  I have a rather large file with tons of named frames that I’ve been iterating on for quite a while.  When I try to create a simple Navigate To interaction, the list of frames for selection is long and unsorted.  It’s getting impossible to find my desired target in that list and I cannot easily just drag a noodle as the canvas is vast.Is there a way to re-sort that list (alphabetically in ascending order would be great!) or at least search by frame name?  Or is this a feature request and not a bug?Here is a fraction of the frame list for selection with a “Navigate to” interaction”.  In it, you can see that the list is not alphabetically sorted. 

I was wondering if there will be more people in the community that might be interested in having the ability to utilise the design that gets generated by Figma Make and converts it to a full Figma design? 

Hello, I recently created several components using existing dimension variables in my file. Now, I would like to reorganize my dimension variables and replace those applied in my components with new variables.Is there a plugin or method that allows me to replace “variable-1” with “variable-2,” for example, in batches and across multiple pages?If you know of a way to do this, please let me know, as it would save me a lot of time ! 😅