Report a Problem

I have two separate files: one for the design system (the library) and another for the main design file. I usually create components in the design system file. I created a loading animated popup footer, and one of its variants uses the “After Delay > Close Overlay” interaction. I tested the prototype and animation in the design system file before publishing it to the main design file, and it worked. However, when I published the component, the “After Delay > Close Overlay” interaction wasn’t applied in the main design file. When I changed the interaction in the design system file to “After Delay > Back” and republished it, the interaction appeared in the main design file. However, after I changed it back to “Close Overlay,” it disappeared again. Please help resolve this issue.

Is my logic correct? I try to highlight 1 button and turn off the other 3 if it’s highlighted. But why the outcome I can’t press any other button if I press 1 button to get highlighted, it’s like locked 🙃

I can rename a layer but I cant highlight parts of text when doing so. Also usually when I click to a different layer, the rename is set… but now it stays editable until I press Esc Happening across web and app.

I’m trying to use the restore version from the history feature. I was using it in the past, it was working. Now it’s not. Restoring the desired version, the file reloads, and the history shows a new entry “Restored version” but when clicking ESC to leave the history mode the file goes back to the pre-restore version. The “Restored version” shows the pre-restore version now 🤨 . I keep encountering bugs all the time lately. History, yesterday one prototype interaction wasn’t working and then miraculously started working after 6h (even though I refreshed proto X times, and approached the case X ways, in the end initial approach started working), 2 days ago a single frame just disappeared. Stop introducing changes, and start fixing bugs, they are getting out of control. Really.

Hi there! I’ve encountered an issue when running my mobile prototypes on an iPhone with the Figma App. Actions placed in the header area (around 44px from the top) will not react on click/tap events. I have run some tests (see the screenshot) The green squares react on the on click event and open the overlay. The red ones don’t. The third square reacts from the bottom half of it. Also tested it with bigger squares to make sure that the clickable area isn’t to small, but had the same result. The issue occured on: iPhone 13 Mini, iPhone 13 Pro Max, iPhone 15 Plus. However it worked on an iPhone SE (with the black bars on top and bottom). It also works as expected on a Samsung Galaxy A40. Thank you in advance! Michael

Hi! Let’s get straight to the point. I have an element in a design where an effect (e.g., box-shadow) is used, and the effect involves several variables: color, blur, spread… I’m trying to unbind the variable that sets the radius, as described in the documentation on this page: https://www.figma.com/plugin-docs/working-with-variables/#example-binding-a-variable-to-a-node-or-style const effectsCopy = clone(node.effects); effectsCopy[0] = figma.variables.setBoundVariableForEffect(effectsCopy[0], 'radius', null); node.effects = effectsCopy; However, I’m encountering an issue where not only the radius variable is unbound but all variables used for this effect are completely unbound. Is this a bug, or am I doing something wrong?

With the new underline styling feature it’s not possible to reset the color to be “Auto” again. It only allows picking from the variables & styles, but no auto option available. This seems to be a bug. I had to re-create a text style because this wasn’t possible. In addition (this is only tangentially related): it should be possible to leave the color on Auto / any pre-defined variable or style AND make it possible to change the opacity of the underline. So I can pick auto and then turn down the opacity to let’s say 50%. This is also needed for general fills and such!

Anyone else having this problem?: My team’s design system library uses extensive variables, but all of a sudden when I go to edit local variables it says I do not have any. All of our variables can still be viewed and used in other Figma files that use the library, I can still toggle modes and when I select components that use the colors in the variable libraries they show up as a library color, but with no label, just a blank rectangle. I also see that I have variables when I go to publish the design system library.

How is this even possible, and why is it happening? I have about 5 files, and 2 of them serve as the main sources for components and variables. For the past 3 days, Figma has been randomly deciding which variables to export to other files and which ones not to. As a result: From one file, I can only see 2 out of 40 necessary variables. From another file, no variables are being exported at all. This morning, I created 4 new test variables, and guess what? They immediately appeared in all the other files. But the critical variables I actually need are still not updating! Where is support? Why hasn’t this issue been resolved after several days? This is paralyzing the entire team’s workflow!

Hi! I’m experiencing an issue where the slides won’t display at the full 1920 x 1080 dimension when in present mode (both when presenting just the slides and in audience/notes mode). We also can’t change the dimensions of the slide itself, so not sure why it’s presenting at a size that don’t fit the default dimensions? The biggest option seems to be the “Macbook Pro 16” at 1728 x 1117px which cuts off a lot of the slide. I’ve already tried troubleshooting (closing tabs, quitting and restarting Figma, and restarting my laptop) and still can’t present at the full dimensions. Included a screenshot and video - would greatly appreciate any help/insight! Thank you!!

We’ve had several completely random people outside of our organisation requesting access to view files that they technically should never have known existed. How do they get access to our files? They have not been shared, they are all set to invite-only and only participants inside our organisation should be able to see these files. It’s happened at least 4 times with 4 different external people, all on supposedly locked and private files. These are company confidential files - how is this possible? How do we prevent this from happening?

One Figma file just keep saying that it has unsynced changes. I did everything but it won’t open. The thing is that I can open the same file using any browser app. I’ve faced this kind of issues with big files, but it opened after a few minutes. Have you faced any issue like this? Were you able to solve it? Note: I’m using Figma Beta

When it comes to updating a branch, it takes a very long time to get the modal, and confirming by clicking “keep branch” takes not just seconds, but almost minutes to get to the next conflict. No matter if I am on my Mac Studio or MacBook Pro in Safari or Figma. It can’t be bandwidth or my machines. It seems to be on Figma’s side.

I am 95% sure that you used to be able to click the left side of the toast shown when you hid the Figma UI in a prototype in order to dismiss that toast immediately. Within the last few months it changed so if you hover the cursor over that area you get a text tool and clicking allows you to select that text (why would I want to do that?). The toast hangs out on screen for ten whole seconds before going away. I’ll often have to do a series of screen recordings of separate prototypes and having to repeatedly wait for that toast to dismiss gets old in a hurry. At the very least being able to select text elements of the Figma UI is a bug.

I’ve been using my variables across different files, but in one file, I can access all three groups of variables and work with them. In another file, I can only see 2 out of the 42 variables I need. Last week, I faced a similar issue where variables didn’t work across different files for 2-5 hours. Now, I’m encountering this problem again. Why did you change your pricing without addressing these bugs? Additionally, on another team account, AI functions aren’t available at all. Figma, are you okay? Please fix these problems before updating your pricing. The main issue isn’t the pricing; it’s that the app doesn’t function properly. I’m lost with this more than half day, because I need updated variables inside another File…

I was assigned an ongoing project at the beginning and saved it in my Draft. I had been working on it for almost a week, and now it’s gone?! How is that possible?

After the update of multi-edit , the indicator in component that locate the element in all the variant is disappeared , Accordingly the push changes to the main component is not updating the changes of elements properties in all variants ? I think this should be fixed , and I suggest the “multi-edit/select” should have it’s own tool , not integrated with the main “select” tool.

It is very annoying that there’s no horizontal scroll on the tabs bar in Figma Desktop app. I want to have a lot of files open at the same time, but when the tabs get too many and they go under the horizontal fold, there’s no way to see or access them except for using the keyboard shortcuts. At some point, I don’t even know how many tabs are hidden from my view 🤷 Please add the ability to scroll or introduce some better tab management.

Random glitches in the file. Double click on element fixing. If someone without edit permissions accesses the file, they encounter a bug they can’t fix. I can resolve any element glitches by double-clicking, but as soon as I leave the file and return, the glitches reappear. It’s really frustrating! Is there a way to fix this? Are you aware of this bug? It’s happening to a few members of our team as well.

1. Describe the bug/issue you’re running into? Text in paragraphs break words instead of reflowing words when space is limited 2. Are you able to consistently reproduce it? If so what are the steps? Yes. Make a post it and type some text with multiple words that cause soft line breaks 3. Share a screenshot, recording, console log, link to the file, etc. 4. Is the issue only happening in desktop app or a specific browser , or both? Chrome 5. What OS/version and/or browser/version are you using? Chrome 89, macOS 10.15

Hi guys, For some reason I can no longer duplicate one of my files in Figma. This initially happened when I created a new branch within the file; so I assumed you can’t duplicate a file whilst it has a branch open. I closed the branch and was able to duplicate the file again. For some reason it recently stopped letting me duplicate it again and I can’t figure out why. We used this file as a starting point for many projects so it’s essential that we can duplicate it. Thanks!

The new divider shortcuts are great; however, I still want the ability to create blank page names using the spacebar. It’s nice to have that extra space to separate sections - it’s much easier on the eyes… Continuing the discussion from Default blank page names:

is it only me?

It seems this is an issue going back to 2023 but I haven’t seen a fix is there one? Video Btw is there a way to embed video instead of a link?