Recently active topics

test

 이 파일이 갑자기 안 열립니다 휴지통에도 없고 빨리 해결 부탁드립니다

I just made a loom recording it: 

How to send or import multiple frames to Figma Make from a Figma Design file?It seems that it is possible to send one frame to Figma Make and it will create a new Figma Make file from that one frame. However, when multiple frames are selected (e.g. different screens of the same prototype) then the “Send to Figma Make” option disappears.I can also see an option to Import from Figma, but the interface for this is terrible when you have thousands of Figma Design files in your enterprise and they each have multiple components within them. Worse still, it seems you cannot import a frame, only components that have been published.Is there something I could be doing differently that would make it easier to import multiple frames from a Figma Design file into the same Figma Make file? As a designerI want to be able to import multiple frames into Figma MakeSo that I have an interactive prototype of what I have designedGiven I have multiple screens designedWhen I select those multiple screensThen

File from drafts disappeared. The name of the file was “DP2 Campaign” but unfortunately i dont have link to this file anywhere. This file disappeared completely, its not in recents, not in trash, not in projects and not in recently closed tabs, its just gone. I tried everything from the community topics with same problem, but nothing seems to work. Is there a way to recover it since it was very important project file?Thank you!

I’d like to know WHO created every annotation, just as with comments.Or at least make it optional. I often want to add “comments” for stakeholders that I want to persist, be visible always, and not be resolvable. So I go with annotations. But I want my name attached to them. At least sometimes.And I find myself asking people “who are these annotations from” quite annoyingly often.

Hello,I am a student  in college in Canada. My  Figma Education plan is locked. I wrote to education@figma.com and sent my education ID. I also contacted SheerID, but they told me: “We are unable to process your verification request.”I need help, please.Thank you.Mouhamed Syll

I attempted to connect Figma Make to our project’s GitHub repository and now I’m permanently stuck with this approval pending status message. My admins already approved the connect request (we verified that), but Make is stuck on pending for approval. There are no option to cancel the request, refresh, create new request or anything else in that matter.How could I possibly recover from this? Permanent approval needed status message 

Hello, i’ve created a simple button, with text, padding and autolayout. I’ve turned it into a component. I now want to make the stroke a property for all the variants, that i can turn on and off with a boolean.However, there is no diamond icon next to the stroke in the right hand panel, so i cannot figure out how to tie it to a prooperty. Is it because the stroke is not a nested item? .

The main source of inspiration for this idea was to match the keyboard shortcuts themselves to different keyboard layouts. Right now, users who don’t use US keyboards have to memorize the location of the keys, rather than to use the actual character location to be able to use the shortcuts. Those involving this region are primarily the case: ABNT2 layout (Brazil). And here’s an example of confusing shortcuts: Although this problem could be solved by just rebinding the shortcuts to the actual character and not the location on the keyboard, I’ve noticed there are some other issues concerning key bindings. On this forum post, a member of the community asked for help on backing one layer level with a different shortcut from what Figma has right now. This makes the user adapt their workflow to the tool, and not the other way around — and that hinders efficiency. It would be nice if the tool itself provided some sort of customization on this regard. Although being a workaround, Mac users c

The Problem In figma, it is currently not possible to persist certain compository styles without having to think of all the possible use cases before and putting them in there, or to provide a component just so that it can be used as a reference, a starting point. The reason for this is that once a layer is in a component, it cannot be replaced, removed, multiplied or reordered. This makes sense, but limits what a component can do. Examples Buttons that are capable of showing any icon. The Icon can only be replaced by a different icon of the same size or the same parent component (icon/*). Meaning, that all icons that are available need to be thought of before. This breaks the components capabilities, because it all of a sudden needs to be aware of the icons it can display. Text-Content Content that consists of a variable structure of headlines, paragraphs, lists, quotes, etc. Designing a Template for a view that will receive content from, for example, a CMS is impossible as a

Hi everyone,I created a Figma project about a month ago and even published it. At the time, I was on the student plan. Recently, when I tried to log in, Figma asked me to re-verify my student status. After doing that, I noticed that my project was missing. The published link no longer works either.I’m certain I didn’t delete anything, and I was the only person in the team. I already checked the Trash and it’s not there.Has anyone experienced something similar? How can I recover my project? Also, does anyone know how to contact a real support agent at Figma? I keep getting redirected to their AI chatbot, and I really need to talk to a human about this.Any help would be greatly appreciated!

I’m currently setting libraries for multiples teams, all them have the same configuration to be shared only for the team, but there is only one that keeps showing in all teams libraries even with all the “shared” options turned off. I already unpublished and published for team only, but the issue persists. Am I doing something wrog? 

I keep on getting a reminder to head into dev mode to remind admins about an upgrade request. Like all the time. Every 10 or 20 minutes maybe. I don't think I ever made an upgrade request and I'm not part of any group that has admins. I signed up with my work email but I'm the only person at the company who uses Figma. It never happens on my personal account.Are other people receiving this as well? It's very annoying.  

When using an element as a pattern source, the pattern currently doesn’t respond to variables applied to that source - for example, if the source element uses color variables that switch between light and dark mode, the pattern doesn’t update when the consuming frame changes modes. It seems the pattern references only the visible state of the source rather than the variable-driven values.It would be great if patterns could follow the variables applied to their source, so that they update correctly with light and dark modes.

Bonjour, Bonsoir, Je suis en plein book sur la partie mobile et chaque projet est long. J’ai donc décidé de créer des chapitres avec chevrons qui se déplient et montre le contenu au click.Seulement je rencontre un problème : lorsqu’un chapitre est déplié, cela pousse la suite, ce qui est une bonne chose, mais la taille globale ne s’agrandit pas.Objectif : J’aimerai que lorsqu’un élément chapitre se déplie la taille globale de la page ajoute la taille de l’élément déplié.Note : j’ai plusieurs chapitres, donc si tout est déplié, la différence entre la taille globale pliée et dépliée sera importante.Help me please 🙏  

Hello, I’ve recently been experiencing an issue while using Figma Buzz. When I try to create a style (text or color) and I’m typing either the Name or Description, I trigger Figma shortcuts that exit me out of the editing process. For example, if I try to type “Orange” to name a color, the “N” key triggers the “Zoom to next frame” shortcut. I’ve been unable to create the color style titled “Orange.” This also happens when I try to edit a style to fill in the Description. It exits me out of the creating or editing a style popup and loses my progress. Wha’s strange is that it doesn’t happen when I initially open Figma, so I’m wondering if something I’m doing triggers this behavior. Any help to fix this would be greatly appreciated!

I’m unable to see the variables icon in any of the fields where they are supposed to appear. Right clicking on the field doesn’t provide the option in the dropdown either. I’m on a pro plan using the latest version of the desktop app.

When clicking “Review library updates” (with the blue notification dot on the library icon), the Manage Libraries panel still opens to the Recommended tab instead of Updates. This makes it easy to miss actual updates — especially since the Updates tab no longer displays any visual indicator to show that updates are available.The Recommended tab is useful, but it’s far less important than reviewing and accepting library updates, which happen more frequently and directly impact active work.Two improvements would make this clearer and more consistent: Default the panel to the “Updates” tab whenever updates are available. Add a visible indicator to the Updates tab itself (e.g., a blue dot or badge count), so updates remain obvious even if the user switches tabs or reopens the panel. These small changes would make library updates easier to notice and act on, especially in large files with many linked components.

I’m new to Figma Web Pages and I’m building my first webpage using a free template. Everything works correctly except for one header button that becomes misaligned when I preview the site in the browser. The button shifts to the left only in the Desktop layout. On Tablet and Mobile it appears correctly.If I resize the browser from Tablet back to Desktop, every other element adjusts normally except this button. It seems to “hit a limit” on the left side and won’t move further right, even though it’s centered inside the Figma canvas.I suspect the issue might be related to conflicting layout or constraints between parent frames, but I’m not sure how to diagnose it. I’m attaching screenshots of all relevant layout settings.Does anyone know what could cause a single button to stop aligning correctly only in Desktop view, even when the rest of the layout behaves normally?Thank you in advance! Different position when viewed on browser and when viewed on the webpage preview inside Figma  

Hi, I created an interactive component that worked fine until one week ago (more or less). Now, when you hover on it the font changes and shows the message “Some missing fonts were replaced”

Hello,I’ve been using Figma make for a couple of weeks, and I always saw “Attach a design” button. My colleague can see “Import from Figma” in the same dropdown menu in the chat. How can I also switch to “Import from Figma” instead?  

Similar functionality to AE, and also Figma’s native Sweep functionality with Ellipses, the ability to trim any path’s Start and/or End points would allow for more optimized design and prototyping. Some examples: Elegant design/prototyping of custom bar and line charts as well as interactive sliders (RN my adjustable horizontal charts and sliders components are leveraging AutoLayout right padding to adjust a stroke set to Fill) More advanced/custom loader animations Easily make drawn path animations

I share this link to inspect the problem:I have a rectangle component in 3 variant:grey purple blackThe rectangle 1st variant after 500ms delay change to 2nd one. And the 2nd after 500ms change back to 1st.Now on click from page 1 that has 1st and 2nd swapping I want to navigate to page 2 with 3rd variant. static.Unfotunately on page 2 I see always 1st and 2nd variant swapping. Help me please, I found this bug on complex prototype but as you can see it is present also on simple one draft. 

Our team is noticing that our main design system library is having hundreds of changes flagged in the publishing panel, even after a weekend of not working on the library. The panel shows what’s modified, removed, or added, but isn’t clear what the changes are or what caused them. It’s scary publishing these types of updates because they aren’t coming from our team. Is this something being caused by Figma? How can we feel comfortable publishing so many changes when we weren’t even the ones making them?