Ask the Community

I know that Figma will export all frames, but it does that into a single PDF from what I’ve tried. It would be great if there was a way to export all frames at once and have Figma create an archive with one PDF per frame, and where each PDF’s filename is equal to the frame’s name. Does anyone know if this is possible or if there’s a plugin to accomplish this? Thank you!

As an instructor and Educator, can i use my Educators plan for non-education work I do outside of my school work?

Le nouvel interface n’a pas beaucoup de sens. On ne comprend pas pourquoi la barre principale se retrouve tout en bas. Cela n’a pas de sens. Outre que tous les sites ont une barre en haut, outre que l’on se retrouve aller vers le bas, puis le haut, pour atteindre d’autres fonctionnalité, puis de redescendre vers le bas (alors qu’avant, tout était en haut), on se retrouve avec cette barre bas avec des sous-menus qui n’ont aucun sens. Car la fonctionnalité la plus importante se retrouve non en début de liste, comme lorsque la barre est en haut, mais en fin de liste. Ainsi, plus la fonctionnalité est importante, plus il faut parcourir la liste et démarrer par la fonctionnalité la moins intéressante. Enfin, un autre problème est que des fonctions pourtant essentielles, se retrouvent en deuxième ou troisième zone, complètement noyer, comme par exemple la création de Composant. 1 309 / 5 000 The new interface doesn’t make much sense. We don’t understand why the main bar is at the bottom. It

So bizarre, Im using an animation for page transitions in Slides… a simple dissolve. But in presentation mode, this massive ‘animate?’ icon is showing in the top left, and dissapears if I click it. How can we get rid of this affordance for my audience?

Good afternoon colleagues. I have a question, why when I design the fonts have different styles like for example the Plus Jakarta font has regular medium and some more, but when I switch to developer mode it changes to a numerical value “500” how do I identify which font it is? and how can I make it not to change the names to numerical values?

Please revert to UI2

Found several posts on search not working but not specifically this. When I search for an component name and type it exactly as its spelt, Search cannot find it. All I see is a small spinning loading circle. Instead I have to manually find the item through the navigation which is highly annoying. None of my team members on the same workspace get this. I have rebooted, reset cache and even reinstalled Figma. No difference when switching between new UI and old UI either. Anyone else had this and has a solution?

I used to only able to make prototype link to only frame level, now I am can add link to, let’s say, the background image of the frame…I can see why how this is useful… but what if in some scenario, I only want my previous screen link only to my next frame instead of the specific elements of it?? The issue now is that it is really hard to link to the screen… it always points to the element inside of that frame…

So main reason I want to go back to UI2 is the fact I have to select ‘version history’ on the left to get my layers back on that column. If I ‘x’ out on the right it gets back to a very distracting list of library thumbnails. So not a great improvement and didn’t know where to put that feedback other than in this forum.

I do see the AI Features activated, but my interface is still the old one, and i’d like to try out the new Figma features, how can i get the updated interface? I’ve tried to update the Figma app and it says that i have the latest version, tried web version and nothing changes

I mean it might be better looking but the older version was handier. They just updated it, in the middle of my work, and now can’t finish it smoothly 🥲

There’s an old main component in the shared library that I would like to remove. This component is a duplicate of a new component that was created. How to unpublish a single component?

Hi! I am doing a school project in Figma and can’t get the Check if/else state to work. I would like to have it possible to progress with the continue button only if a location is selected as in the picture: I have it set so when you are in default variant the boolean is set to false and set to True when you are in the variant displaying the location has been selected The animation between variants works but it doesn’t change the value of the boolean. Can someone point out what I am doing wrong?

The thing is, holding alt while you resizing used to let you disable the snap to feature quickly and easily, and it was so intuitive. Now with the new update, it makes what you are resizing, get mirrored in the other direction (if you are trying to drag it down to make it longer, it makes the top go up the same amount). This is never useful. If you wanted the top to go up you would just drag that as well. A very useful feature, got replaced with a useless one. Who thought this was a good idea?? Make the alt function like it was before and get rid of this mirroring nonsense.

Hello! I am looking for advice/solution to help me understand what is going wrong with the variable I am using for counting a percentage for an upload document prototype. We want to show visual feedback of percentage of the document that has been uploaded. I am currently using this variable, and on delay I want the number to count from 0%-100%; however, I am only able to get the number to count from 0%-2% & that is where the variable stops working. Any idea on what else I can use, or what the issue might be? Thanks in advance!

Hello everyone, today I wanted to copy a simple presentation I made some time ago to Figma slides and I just couldnt figure out a way to do it simply. When I just copied all slides, it imported about half of them. I had to copy and paste them one by one. I consider myself an advanced Figma user and wanted to try Slides for the first time and I know the great Figma team can do better

Hi, We were exploring Figma for our team so we’ve bought one paid account. We’ve played with roles, folders, files etc. During this process one client critical file has been lost. Files has not been deleted by account owner or any of other team members. Files is not available under “deleted”. We are missing the file as it is business critical. Is there any chance to recover it. We’ve already send ticket or two to support but no feedback yet? I’ve red through the forums and saw there are some cases when deleting teams/projects or some other strange setup may “create” a missing file status. However I am not sure how to proceed to try this option. Thank you.

I’ve shared access with an account that is outside our organization to edit our Figma space. The account accepted the invite, however in the sharing settings their account name appears with an exclamation mark next to it and a message that says "this person has a restricted account. They will be able to edit files when their account is upgraded. Is this a problem on their account end or is there something we can do to fix this issue?

Hi there, I am in DEV Mode and from yesterday I cannot see the layout section as usual. Before I saw something as css code and I could copy and paste it in my code. Also I had a section called “style” with more css code. Now I have a different layout with only a few properties and it is not formatted as css. How can I see what I saw before? It is how it looks like now: Thanks in advance.

Does anyone know how to embed your prototype into a Figma website/presentation frame? I want to embed the interactive prototype inside a website frame to create a walkthrough with dropdowns that explains certain aspects of an application with tips and hints.

Hello, I’ve question for who want to help me to better understand. I’ve an account, a team and a project, and for this my company pay a seat (professional). I need to involve a colleague in this project that work for a different company. He has already his own account and his company already pay a seat for him (professional). The question is…is there a way to work together as editors to my project using our personal account, and our personal seat paid by our companies? Thanks a lot who want to answer.

Simply trying to have a fixed nav at the top, with scrolling content. Bonus if it can go under the nav. No matter what I do, the content only scrolls a few px. https://www.figma.com/design/ZRF1JsdKOmVvXAfFqeASWv/Prototype-scroll-issue?node-id=1-11079&t=Vffha5RVFijkFPm2-1 prototype https://www.figma.com/proto/ZRF1JsdKOmVvXAfFqeASWv/Prototype-scroll-issue?node-id=1-11079&t=Vffha5RVFijkFPm2-1

I’ve just created my account and for my first project, I can go ahead because rectangles disseappered as soon as I drawn them. I don’t know why. Someone to help me fixe this issue

I’ve noticed that some of the design features are not displayed correctly on the right panel. For instance, the appearance options are missing. What am I doing wrong?

I have a slide in Figma Decks that uses a photo background. I’ve applied a color overlay and blur to the background. The blur set on the background affects all elements on the page. The color overlay does not affect the elements on top of it. I have tried ‘Bring to Front’ on the other elements with no change. Steps to reproduce: Create a new deck in Figma Decks. Create a new slide and add a photo background (I’m using the ‘crop’ setting) Add a color overlay Add a blur (e.g. 5%) Result: All elements on slide appear blurred. Expected result: Only background should be blurred. I recognize this product is still in beta, but this should be fixed before release or the option should be removed – I can’t see a use case for the blur option in it’s current state as it obscures any useful info on the slide. This has also been reported here.