Suggest a Feature

I’ve got this very simple set up of a card component in a carousel. The card label has truncation enabled with max lines set to 2. Almost all of my cards in the carousel use two lines of text, but one card only needs one line. This results in that one card being shorter than the others: Normally I’d work around this with some combination of fixed height layers or maybe setting the one card to fill the container’s height, but neither are sustainable. I just want the card label to have up to two lines, but have the option to reserve the space if it doesn’t use all the space.

I love sections and it has become a main way for us to organize our flows, so we end up putting sections inside sections inside sections. At a certain point the section name headers overlap each other and overlay on top of designs making it hard to look at designs when zoomed out. It doesn’t help that the bubble has the same color as the section background. Maybe make the names only appear when you zoom in? or make them show up on top? please and thank you

When inspecting websites, it would be helpful if I could paste in a CSS gradient such as: linear-gradient(to bottom right, #0096FF, #BB64FF, #F55273) directly into the fill field: The field already does some of this (it allows pasting rgb, rgba, oklch color functions and it converts to the appropriate fill).

The FigJam behavior has recently changed. Now, when I paste a screenshot into FigJam, it automatically adds an ‘image border’. Every time, I have to manually deselect it to remove the border. Is there a way to revert to the old behavior where the border was not automatically added to imported pictures?

There’s a post floating around about being able to embed videos into slides, but it would be nice to be able to embed different content beyond videos. Spline.tool, Airtable, Jira, and a million more examples have embeddable export options that would be useful to be able to present. Being able to have a Spline.tool mouse reactive component on a page would be a game changer.

I end up pinning a lot of files at the top, sometimes from other designers in the org from completely different products. But, it gets kinda cumbersome with a ton of pins, would LOVE a way to just do it similar to how bookmarks work in a browser. Give me a folder, let me pin things into those folders. <3

Please add “Zoom to selection” to the canvas zoom settings menu list. Zoom to fit (Shift +1) is listed, but for some reason Zoom to selection (Shift+2) is not.

The new Figma has presented challenges. The tool bar at the bottom takes away from the workspace. Ideally it would be great for each user to be able to set up their workspace (even if I have to do it once a day). Files and Assets Design/Prototype ToolBar it would be great if these could be movable cards that could be minimized, sized or expanded and placed where the user wants them. For example I would have: Expanded toolbar top left Files and Assets 2nd left Desking Protoytpe 3rd left. if I could then arrange the items in the Design/Prototype section so that the most used are available that would be great as well.

Ability to set the position of X and Y to be a percentage based off the parent This will be useful when the element is positioned absolutely. E.g. set Y to be 100% (will mean that it will always sit below the parent even if the parent or the element itself changes height) Example: This is particularly useful for dropdown components as the dropdown list changes size depending on how many options are shown and the parent height can fluctuate as well

This is something that affects all of us who work designing for Angular with CSS Grid, something that developers ask us and that we ask for in the design team. A few hours ago, I saw a tweet from Grilli Type, in which he defined it perfectly. Do you know if this will ever be possible? via x.com

It would be great if we have a bubble cursor in Prototype mode when the Device is set to NONE. I like the concept of bubble cursor, it gives more natural interaction to the prototype. but I’m trying to record a prototype with Device: None for minimal view, I get pointer cursor which is unnatural. It would be great if we have an option to enable or disable bubble cursor no matter whether device is selected or kept as NONE.

I think that in the part where you add value to the text size, there should be a ‘T’ icon with increment and decrement options using the mouse. Right now, there is only a 1px line on the left.

Hello Figma team, I would like to suggest that you can change the “scroll behavior position” within the prototype by device. Let me explain better: I need to activate Sticky for a component on the Desktop, but I don’t want to use Sticky within the Mobile version. Here’s a tip to allow us to change this condition instead of working with 2 component variants for each device. Thank you!

I would like to submit a request to add the ability to change the spacing between words in the text. There is space between letters, but there is no space between words. Please add this, especially since it is such a common CSS attribute. This is also one of the WCAG 2.1 AA requirements, which will soon become mandatory and it would be nice to be able to use it in Figma. WCAG 2.1 will require for AA, among other things: - Word spacing to at least 0.16 times the font size; Line height (line spacing) to at least 1.5 times the font size; Spacing following paragraphs to at least 2 times the font size; Letter spacing (tracking) to at least 0.12 times the font size;

Hello! Is there a way to have the prototype size auto-adjust to the slides size vice versa? Otherwise there’s an awkward background on the left and right edges of the prototype, and if I size the prototype any bigger, it gets cut off. Thanks!

As mentioned in title - Alt + mouse wheel up/down to go up/down layers tree. It would be super fast and easy, and our hand can stay on the mouse, ready for the next action.

I love to edit components directly in the copied object, it’s nice to edit something external to the main object. Then, if the result is nice I just “push changes to main component” is the best tool I’ve seen in my forgotten years working with design software but, if sometimes I made many changes in the object I just click in “reset changes”, ok, it’s fine. But for example now: I edited many copied items menu, one looks good and I updated the main, nice. But the others edited don’t get the new style then I will go to “reset all changes” and the new style apply to all object but I also lost the labels I changed in the items menu. Will be nice to have a “reset only styles” option to avoid lost component properties like text.

I’d like the divider to appear in Dev Mode.

It would be great to add .mp3 sound files into the prototype so you can simulate alarming or voice control scenarios.

I know it is possible to do this in prototype, and there are third-party tools that allow you to put a scrollbar on frames to give it the browser look, but it would be great if when clipping content of a desktop, tablet or mobile frame a scrollbar appears on the right and you can scroll through the content as if it was a browser in the design view.

After creating two different frames and applying auto layout, I selected both frames as “Fill container.” When I switch between vertical and horizontal layouts, the width should remain fixed. Both frames should automatically adjust their widths to equal sizes within the fixed frame. But now it’s not happening and it’s getting double work for us. Please find the link to access the video.drive.google.com

Hi, I suggest implementing a search function within the nested instant dropdown menu. This would improve efficiency by enabling users to find specific components easily in case the list is too long.

I wanted to share a Figma slide with the community. Other files are available to share. But Slides are not available to share. why is this happening? Ask the community slides

This is a paradigm which is rampant in the audio technology and across all controls – knobs, sliders, enums, you name it – double clicking a control sets the value to or ‘center’. This would be FANTASTIC in Figma! Especially for (re)setting margins!

There is no Widget for FigJam to JIRA server integration, only for JIRA cloud exist. This is a big issue for us when thinking to change from Miro to FigJam